ZPS - FN Zlín

Carbide drill SK / TK / HA / PVD for aluminum, non-ferrous metals and plastics Diameter: according to the selected variant Helix length: according to the selected variant Total length: according to the selected variant Length: 5D Other dimensions - see the attached catalog sheet Diameters that you only found in the catalog sheet are made to order. Tip angle: 140° Coating: ZrN - Coating with high corrosion resistance and high resistance to adhesion of non-ferrous metals. Machining Al alloys with a lower Si content, or machining of plastics and copper. Standard: DIN6535 HA (smooth shank) Usage : Aluminum, Al-alloys, copper, brass, bronze, plastics and other non-ferrous metals Aluminium, Al-Si alloys (Si < 6%) up to 400 MPa Al-Si alloys (Si < 12%) up to 600 MPa Aluminum alloys ( Si > 12% ) up to 600 MPa Copper, copper alloys, brass and bronze up to 800 MPa Plastics up to 300 MPa Cat. No. - series: S10132 ZrN

Carbide drill SK / TK / HA / PVD Diameter: according to the selected variant Length: 5D Helix angle: 30 - 35° Tip angle: 140° Four-surface grinding Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low alloy steels up to 600 MPa Alloyed steels up to 1200 MPa Highly alloyed / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steel up to 820 MPa Gray cast iron Catalog number: S10222

Carbide drill SK / TK / HA / PVD Average: according to the selected variant Length: 8D Helix angle: 30 - 35 ° Tip angle: 135 ° Four-area cut Coating: AlTiN (Aluminum Titanium Nitride) Carbide: fine-grained K20 / K30 Standard: DIN6539 Usage: Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Hardenable (hardened) steels Catalog number: S20122

Carbide drill SK / TK / HA / PVD Diameter: according to the selected variant Length: 15D Drill lengths - see individual variants Helix angle: 30 - 35° Tip angle: 135° Coating: AlTiN (Aluminum Titanium Nitride) Standard: DIN6539 Usage : Steel, stainless steel, titanium, aluminum, nickel, cast iron, plastics, steels up to 65 HRC Automatic and structural steels up to 600 MPa Structural and cast steels up to 850 MPa Low-alloy tool steels up to 1100 MPa Tool and refined steels above 1100 MPa Stainless steels up to 750 MPa Cast iron up to 240 HB Cast iron above 240 HB Cat. No. - series: S70112