Wood drills
-
HSS bimetal jigsaw - for metal, RUKO
Crown drill / puncher / drill bit bi-metal Average: according to the selected variant Max. drilling depth: 38mm Cutting conditions - see the enclosed catalog sheet Suitable for drilling in: non-alloy steel, non-ferrous and light metals, plastics, plasterboard, reinforced boards, plywood and woodworking HSS bimetallic jigsaws with variable gearing. For easy-to-machine materials, the variable toothing ensures a more even tool passage and requires less effort. Thanks to lower vibrations and heat generation during cutting, up to three times longer service life is achieved. Suitable for non-alloy steels up to 700N / mm2, non-ferrous and light metals, plastics, plasterboard boards, reinforced boards, plywood and for working with wood.
from 3,87 € with VAT -
Wood drill HSS StandardLine, type DR1121RNHSS
Classic short wood drill bit with centering point Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Material: forged black HSS steel, ground edge Arms with blades drill precisely and without crushing. Ideal for drilling dowel holes, suitable for soft and hard wood, plywood, chipboard, hard fiber battens and veneers.
from 0,58 € with VAT -
HSS TopLine wood drill , type DR338RCZ50
Short machine drill for wood with a centering tip for burr-free drilling Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Vertical angle: 180° Screw: 35-40° Material: polished HSS steel Suitable for manual drilling in battery drills and column drills. Suitable for drilling into wood, umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows for quick removal of chips. Due to the rounded back edge of the groove, chips do not stick with the drilled material. The drilled hole is burr-free thanks to the geometry of the tip.
from 2,90 € with VAT -
HSS TopLine extended wood drill , type DR340RCZHSS
Extended machine drill for wood with centering tip for burr-free drilling Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Vertical angle: 180° Screw: 35-40° Material: polished HSS steel Suitable for manual drilling in battery drills and column drills. Suitable for drilling into wood, umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows for quick removal of chips. Due to the rounded back edge of the groove, chips do not stick with the drilled material. The drilled hole is burr-free thanks to the geometry of the tip.
from 5,01 € with VAT -
HSS TopLine extended wood drill, type DR150RCZ50
Extra long machine drill for wood with a centering tip for burr-free drilling Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Vertical angle: 180° Screw: 35-40° Material: polished HSS steel Suitable for manual drilling in battery drills and column drills. Suitable for drilling into wood, umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows for quick removal of chips. Due to the rounded back edge of the groove, chips do not stick with the drilled material. The drilled hole is burr-free thanks to the geometry of the tip.
from 11,88 € with VAT -
Wood drill extra long HSS TopLine, type DR250RCZ50HSS
Extra long machine drill for wood with a centering tip for burr-free drilling Diameter: according to the selected variant Blade length: according to the selected variant Total length: according to the selected variant Vertical angle: 180° Screw: 35-40° Material: polished HSS steel Suitable for manual drilling in battery drills and column drills. Suitable for drilling into wood, umakart boards, plastics, soft and hard wood, MDF, etc. The wide groove allows for quick removal of chips. Due to the rounded back edge of the groove, chips do not stick with the drilled material. The drilled hole is burr-free thanks to the geometry of the tip.
from 15,38 € with VAT -
Sliding holder for bimetallic drill bits 32-305mm, Karnasch
Retractable holder, mandrel for clamping bimetallic crowns 20.1169 Clamping range: 32-305mm(idally 100-305mm) Clamping shank: hexagon 9.5mm(3/8 ") With this holder, you will not have a problem pulling the drilled material from the center of the crown. Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.
On request32,98 € with VAT -
Set of 7 bimetallic punches 22-68mm HSSCo8 - for metal, Karnasch
Set of core drills / jigsaws / bi-metal drill bits 20.1501 for electricians Diameters: 22/29/35/44/51/64/68 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.
On request91,28 € with VAT -
Set of 9 bimetallic punches 19-64mm HSSCo8 - for metal, Karnasch
Set of core drills / jigsaws / bi-metal drill bits 20.1502 for plumbers Diameters: 19/22/29/35/38/44/51/57/64 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.
In stock100,36 € with VAT -
Clamping holder for bimetallic drill bits 32-210mm hexagon 9.5mm, Karnasch
Holder, mandrel for clamping bimetallic crowns 20.1503 Clamping range: 32-210mm Clamping shank: hexagon 9.5mm Drill diameter: 6.35mm Thread: UNF 5/8 "x 18 strokes per inch The holder includes an HSS drill.
In stock12,66 € with VAT -
Set of 9 bimetallic punches 16-67mm HSSCo8 - for metal, Karnasch
Set of core drills / jigsaws / bi-metal drill bits 20.1504 - universal Diameters: 16/19/22/29/35/44/52/57/67 mm Max. drilling depth: 38mm Set includes holders 20.1507 and 20.1521 Cutting conditions - see enclosed catalog sheet Material: HSS Co8(-speed steel with 8% cobalt) Fine toothing - 4/6 "gearing Suitable for drilling in: alloy and common steels, stainless steel, non-ferrous materials and light metals HSS Co8 bimetal jigsaw with fine toothing. Fine toothing is very well suited for It ensures a quieter operation and requires less effort.Thanks to less heat generation during cutting, the service life is extended especially for metals. such as stainless steel, acid-resistant steels, non-ferrous materials and light metals.
On request96,78 € with VAT