Torque wrenches
-
Set of open end wrenches 10-19mm(10pcs) for brake pipes, square 3/8 "
Set - open nuts for tightening / loosening chucks / nuts / brake pads Type CROWFOOT Dimensions: 10-11-12-13-14-15-16-17-18-19 mm < Cr-Mo: Chromium molybdenum, chrome plated Open Key for holenders and brake pipes - Dimensions: Distance between Square Side and Tube: 5mm Also Use with Extension - see Attached Torque Keys Photos < Momentary key is not included.
In stock78,54 € with VAT -
Torsion angle ratchet torque wrench - protractor 0-360st. , with clamp, BGS
Momentometer with magnet for additional tightening of the torque, ie after tightening the bolt for a given moment < cylinder heads with torque wrench to 20 Nm and subsequent "drop" by 180 st. Terminal for easier fastening.
On request32,09 € with VAT -
Torsion angle ratchet torque wrench - protractor 0-360st. , with flexible magnet, BGS
Torque torch with magnet for additional tightening of the torque, ie after tightening the screw at a given moment < cylinder head with torque wrench to 20 Nm and subsequent "drop" by 180 st. Magnet for easier fastening.
In stock38,25 € with VAT -
Torque wrench 5-25Nm 1/4 "TONA Expert E100105T calibrated
Torque Wrench with Calibration Sheet Square Size 1/4 " Range 5-25Nm Rated Handle Overall Length 320mm Material: Chromium - Vanadium Switching Right / left running Supplied with Czech instructions Supplied in a durable plastic case
In stock130,75 € with VAT -
Torque wrench 10-50Nm 3/8 "TONA Expert E100106T calibrated
Torque Wrench with Calibration Sheet Square Size 3/8 " Range 10-50Nm Rated Handle Overall Length mm Material: Chromium - Vanadium Switching Right / left running Supplied with Czech instructions Supplied in a durable plastic case
In stock129,49 € with VAT -
Torque wrench 20-100Nm 1/2 "TONA Expert E100107T calibrated
Torque Wrench with Calibration Sheet Square Size 1/2 " Range 20-100Nm Rated Handle Overall Length mm Material: Chromium - Vanadium Switching Right / left running Supplied with Czech instructions Supplied in a durable plastic case
In stock134,43 € with VAT -
Torque wrench 40-200Nm 1/2 "TONA Expert E100108T calibrated
Torque Wrench with Calibration Sheet Square Size 1/2 " Range 40-200Nm Rated Handle Overall Length mm Material: Chromium - Vanadium Switching Right / left running Supplied with Czech instructions Supplied in a durable plastic case
In stock141,61 € with VAT -
Torque wrench 60-340Nm 1/2 "TONA Expert E100109T calibrated
Torque wrench with calibration blade Dimension four edge 1/2 " Range 60-340Nm Total wrench length mm Material: chrome - vanadium Switch right / left hand * Left hand is for loosening only, cannot be used for torque tightening of left screws Supplied with Czech instructions Supplied in a durable plastic case
In stock149,23 € with VAT -
Torque wrench 150-750Nm 3/4 "TONA Expert E100110T calibrated
Torque wrench with calibration blade Dimension four edge 3/4 " Range 150-750Nm Total wrench length mm Material: chrome - vanadium Switch right / left hand * Left hand is for loosening only, cannot be used for torque tightening of left screws Supplied with Czech instructions Supplied in a durable plastic case
On request500,71 € with VAT -
Torque screwdriver 1-5Nm with adapter and bit set
Calibrated Torque Wrench Square Size 1/4 " Range 5-25Nm (45-255 KGS) Ratted Handle Overall Length 280mm Material: Chrome - Vanadium Right / left-hand switching The 90 ° 60 ° 30 ° 0 ° degrees are marked on the head. Supplied with the Czech Instruction Manual. The key is equipped with a serial number for possible calibration. Supplied in a durable plastic case > Key weight: 590g
In stock94,46 € with VAT -
Digital torque adapter 20-200Nm for 1/2 "ratchet, EXTOL PREMIUM
Torque Adapter Ratchet, Digital Range 20-200Nm Resolution 0.1 Nm Accuracy / - 3% Kg-cm, Kg-m, ft-lb , in-lb, Nm Ratchet square is 1/2 " The adapter can be fitted with a 1/2" square key. The use of 1/4 "and 3/8" square keys is possible with the reductions included in the package. Battery CR2032
On request61,81 € with VAT -
Torque wrench 2-24Nm, square 1/4 ", PROTECO
Range: 2-24 Nm Square 1/4 " This is a so-called torque wrench - it means that when the preset tightening torque is reached, the head is sharpened, which is accompanied by a characteristic click. < This torque wrench is designed for precise tightening in the range of 2 - 24 Nm in its working range. The key is tilted and the grip is fine on the handle. The preset tightening torque is suitable with a screw in the bottom handle parts Head has a 1/4 "driver. A key with the same range with a 3/8 "driver is also available on request. Detailed Keys for Using,
In stock33,31 € with VAT
