Tools for repairing threads
-
Thread repair insert UNx8, length 1.5D, V-Coil
Stainless steel threaded insert for repairing the American UN inch unified thread Dimension and pitch: according to the selected variant, pitch 8 steps per inch Length of the insert: 1.5 D (given in multiples of the nominal diameter of the thread being repaired) * The length of the insert is given in the expanded state, i.e. after insertion into the thread being repaired , i.e. if you are repairing a UNF 1/4" thread with a 1.5D insert, then the length of the insert is 1, 5 times 1/4" (=6.35mm), i.e. 9.525mm. Standard: DIN 8140 Tolerance of the internal thread of the insert: ISO 2 (6H) V-Coil thread inserts are made from high quality chrome nickel stainless steel and create strong, internal threads that are resistant to heat and corrosion. The unique design ensures superior threads whose overall performance characteristics cannot be duplicated by any other method. Material: chrome nickel austenitic unstabilized steel (food grade stainless steel), newly marked according to ČSN 10088-1 1.4301 ( X5CrNi 18-10 ), old designation AISI 304, ČSN 17240, AKV 7
from 7,25 € with VAT -
Thread repair tap - metric HSS, V-Coil
Machine tap for thread repair Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 7,88 € with VAT -
Thread repair machine tap - metric HSSE, V-Coil
Machine tap with chip breaker, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 9,33 € with VAT -
Thread repair spiral machine tap - metric HSSE , V-Coil
Machine tap in a spiral, for thread repair Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 9,08 € with VAT -
Tthread repair tap - metric HSS 6-point , V-Coil
Machine tap for thread repair in battery drills Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 4,85 € with VAT -
Thread repair forming machine tap - metric HSSE , V-Coil
Forming machine tap, for thread repair Size of the repaired thread: according to the selected variant Form : B Dimensions according to the attached photos. For threaded inserts according to ISO 2 (6H) The thread cut with this tap has a tolerance of ISO1 (4H) After creating a thread with this tap, it is necessary to insert a stainless steel spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 17,70 € with VAT -
Thread repair combined tap - metric HSS-G , V-Coil
Disposable tap for thread repair A drill is not needed to repair the thread - the tapper cuts the thread at once. Size of the repaired thread: according to the selected variant Material: HSS - High-speed steel Fitting: ISO1 / 4H Cuts a thread for V-Coil threaded inserts according to ISO 2 ( 6H ) After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with regular metric cutting set / machine taps.
from 16,84 € with VAT -
Thread repair machine tap G - HSS, V-Coil
Machine tap for thread repair For threads: G or BSP - British inch pipe thread, used in the Czech Republic, basic pitch, apex angle 55° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 14,79 € with VAT -
Thread repair tap set G - HSS, V-Coil
Manual garden tap for thread repair For threads: G or BSP - British inch pipe thread, used in the Czech Republic, basic pitch, apex angle 55° Size of the repaired thread: according to the selected variant Form : C Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 29,57 € with VAT -
Thread repair tap UNC - HSS , V-Coil
Machine tap for thread repair For threads: UNC - Unified American inch thread, basic pitch, peak angle is 60° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,90 € with VAT -
Thread repair tap UNF - HSS, V-Coil
Machine tap for thread repair For threads: UNF - Unified American inch thread, fine pitch, peak angle is 60° Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,76 € with VAT -
Thread repair tap BSW - HSS, V-Coil
Machine tap for thread repair For Threads : BSW - British Inch Thread, Basic Pitch, 55° Apex Angle Size of the repaired thread: according to the selected variant Form : D Dimensions according to the attached photos. For threaded inserts After cutting the thread with this tap, it is necessary to insert a stainless spiral insert into the thread. I.e. the repaired thread will only be created after the insertion of the spiral insert. *** The thread cut with this tap does not/need not have a standard dimension = it cannot be replaced with ordinary cutting set / machine taps.
from 7,76 € with VAT