Tools for repairing threads
-
Workshop set for thread repair UNF 1/4 - 1/2 "
Thread repair kit, type UNF This workshop kit contains thread repair kits of the following dimensions in the case: UNF 1/4 "x28, UNF 5/16" x24, UNF 3/8 "x24, UNF 7 / 16 "x20, UNF 1/2" x20 For each size there is a set: 1x drill of the appropriate size, 1x tap, 1x insert, 1x breaker. The set of course also includes threaded inserts, in the following numbers: 1/4 ": 25x 5/16": 25x 3/8 ": 25x 7/16": 25x 1/2 ": 10x
In stock86,16 € with VAT -
Thread repair kit M 10x1.0 for spark plugs
M10x1.0 Thread Repair Kit / Stern Thread Repair Gradient: 1.0 - Fine Gradient stacked candles. 1pcs - ) 5pcs - threaded inserts of 2.0D (after insertion into a thread about 20mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert
On request34,70 € with VAT -
Thread repair kit M 12x1.25 for spark plugs
M12x1,25 mm Thread Repair Kit / Socket Thread Repair Gradient: 1,25 - Fine Grip stacked candles. 1pcs - ) 5pcs - threaded inserts in 2,0D (after insertion into a thread about 24mm) Insert lengths are always a multiple of the diameter of the thread to be repaired, ie if you repair a thread M6 and in the set are 1.5D inserts, then the length of the insert is 1.5 times 6mm, ie 9mm. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert
In stock44,12 € with VAT -
Thread repair kit M 14x1.25 for spark plugs
M14 Thread Repair Kit (M14x1,25) mm / Socket Thread Repair Grip: 1,25 - Fine Grip Set contains: 1pcs - Special Stage Tap - Works as well drill bits 1pcs 5pcs length liners are each a multiple of the diameter of the repair of the thread, i.e. e.g. if correcting M6 thread and the set of the inserts 1.5D, then the length of the insert of 1.5 6 mm, 9 mm, therefore. If you need a shorter or longer insert, we can offer it separately in lengths of 1.0D / 1.5D / 2.0D / 2.5D / 3.0D. If the length does not suit you, you can adjust the length - cut, wipe, chip - if possible, be careful - the inserts are stainless, it will not be easy. Thread Repair Method: 1. Cut the thread with a (special) tap (use of other - machine or taps does not work) 2. Using the supplied boot loader, insert the insert to the required depth (be careful, the inserts can not be retightened!) 3. If you put the cutter (if it is included in the set) or the pincers, break the insertion part on the insert
In stock40,06 € with VAT