Special measuring tools
-
Cutters for cutters
-
Measuring rods, thorns and spikes
-
Hardness testers
-
Thickening chambers
-
Rangefinders
-
Precise inspection mandrel ISO40 x 40 x 300mm, A40
Inspection mandrel for checking spindle runout, for steep taper ISO SK 40 Diameter of the measuring part: 40mm Length of the measuring part: 300mm Thread in the cone: M16x2.0 Accuracy: - 0.003 mm Standards: ČSN 251928, DIN2080 Order no.: A40 D40x300 ( replacement 3405-413)
In stock196,60 € with VAT -
Precise inspection mandrel ISO50 x 40 x 300mm, A50
Inspection mandrel for checking spindle runout, for steep cone ISO SK 50 Diameter of the measuring part: 40mm Length of the measuring part: 300mm Thread in the cone: M24x3.0 Accuracy: - 0.003 mm Standards: ČSN 251928, DIN2080 Order no.: A50 D50x300 ( replacement 3405-412)
In stock260,85 € with VAT -
Digital universal hardness tester ISHU-330, Insize
Portable digital hardness tester - Rockwell, Brinell, Vickers, MPa - with fast measurement (2s) with data output via USB cable, dust and water resistant Scale: HRC , HV , HB , HRC , MPa Measuring ranges : HV : 100-940 (resolution 1HV) HB : 80-650 (resolution 1HB) HRC : 20-70 (resolution 0.1 HRC) MPa: 370-1740 (resolution 1MPa) Measurement accuracy: HB/HV: up to 3%, HRC up to 1.5% Small puncture tip. The test force and time do not depend on the operator of the measurement, the measurement takes only 2s. Memory: 1024 records Working temperature: -20°C to 40°C The part includes a type A probe with a testing force of 50N for general measurements. Max. roughness of the measured surface: Ra 2.5um Min. weight of the measured object: 0.1kg Min. thickness of the measured object: 0.1kg Min. radius of the measured object: 5mm Min. thickness of hardened surface layer: 0.1mm Min. diameter of the measuring area: 1mm - It is possible to purchase a type B (ISHU-460-B) probe for the hardness tester, which is suitable for hardened materials (force 10N, Max. surface roughness 1.5um and min. thickness of hardened layer 0.03mm). Package includes probe type A, 2x batteries, charger, USB cable and software
On request3.480,01 € with VAT -
Digital ultrasonic thickness gauge 0.8-300mm ISU-100D, Insize
Ultrasonic thickness gauge with backlit display Measures thickness from one side of an object - applicable to pipes, tanks, etc. Also suitable for metals, plastic, glass, nylon, resin, ceramics and ice Measurement range: 0.8 - 300 mm Numerical step: 0.01 mm ( when measuring up to 100 mm) and 0.1 mm ( when measuring above 100 mm) Touch diameter: 10.8 mm IP protection: none Accuracy: a) 0.04mm (when measuring up to 10mm) b) 0.04 H/1000mm (when measuring between 10-100mm ) c) H/333mm (when measuring 100mm and more) - H is the measured thickness in millimeters Minimum measurable pipe size: 20x1.2mm (diameter x wall width) Measuring principle: ultrasound (5MHz) Working temperature:
On request486,46 € with VAT -
Digital ultrasonic thickness gauge 0.8-300mm ISU-250C with data output, Insize
Ultrasonic thickness gauge with backlit display with USB data output (export to Excel , Word) Measures thickness from one side of an object - applicable to pipes, tanks, etc. Also suitable for metals, plastic , glass, nylon, resin, ceramics and ice Measurement range: 0.8 - 300 mm Numerical step: 0.01mm (when measuring up to 100mm) and 0.1mm (when measuring above 100mm ) Touch diameter: 10.8mm IP protection: none Accuracy: a) 0.04mm (when measuring up to 10mm) b) 0, 04 H/1000mm (when measuring in the range of 10-100mm) c) H/333mm (when measuring 100mm and more) - H is the measured thickness in millimeters Minimum measurable dimension tubes: 20x1.2mm ( diameter x wall width) Measuring principle: ultrasound (5MHz) Working temperature:
On request1.077,92 € with VAT -
Rockwell ISH-MRD200 digital hardness tester, Insize
Rockwell ISH-MRD200 Universal Digital Hardness Tester Type: Digital Scales: HRA, HRB, HRC, HRD, HRF, HRG * next after purchase of tips it is possible to HRE , HRH and HRK) Resolution: 0,1HR Max. height of the tested object: 170mm Max. diameter of test item: 165mm Test force: 588N, 980N, 1471N Accessories: 1x test run for pr. 60mm 1x test rod for dia.150mm 1x V-prism 1x touch - diamond cone 120 ° 6x touch - ball 1 / 16A c € A “ 1x set standard HRB 88 A c € â € o95, HRC 60 A c €⠀ o 65, HRC 20 A c € â € o 30 1x dust cover 1x USB cable and software 1x 230V power cable; 50 / 60Hz Possibility of transfer to PC wirelessly or via USB. Load-up mode: automatic Display power: built-in rechargeable battery Dimensions(W x D x H): 160 x 520 x 700 mm Hardness tester weight: 60kg Optional for hardness tester: Wireless printer ISH-DS-PRINTER Carbide ball contact 3,175mm ISH-EHK-INDENTER Test standard HRB88-95 - ISH-BHRB Test standard HRC60-65 - ISH-BHRC3 Test standard HRC20-30 - ISH-BHRC1 Washer with V-prism for rollers with a diameter of 2-4mm - ISH-SMALLANVIL
On request3.174,63 € with VAT -
Portable digital hardness tester ISH-SPHA, Insize
ISH-SPHA Portable Digital Hardness Tester Type: Digital Scales: Leeb(HL), Vickers(HV), Brinell(HB), Rockwell(HRC HRB)) , Shore(HS) and measurement of strength(tensile length) in MPa Resolution: 1HL, 1HV, 1HB, 0,1HRC, 0,1HRB, HS, 1MPa Accuracy: -6HL(at HL = 800) Data output: bluetooth and USB Power supply: built-in rechargeable battery Accessories: 1x display unit 1x Touch - type D 1x printer 1x Test block - type D 1x Support ring 1x cleaning brush 1x Power cable 1x USB cable and photware 1x stylus for touch screen Possibility of transfer to PC wirelessly â € oOr via USB. Dimensions(W x D x H): 83 x 24 x 135 mm Hardness tester weight: 350g For hardness tester you can buy: Touch type DC: ISH-SPHA-DC Touch type C: ISH-SPHA-C Touch type D 15: ISH-SPHA-D15 Touch type DL: ISH-SPHA -DL < br> Touch type G: ISH-SPHA-G Test block type D: ISH-BHLD Test block type G: ISH-BHLG Connecting cable: ISH-COUPLANT Support rings
In stock1.647,75 € with VAT -
Digital laser rangefinder SW-E40 - 40m
Suitable for measuring the distance between two points, volume and area. Suitable for indoor use only, the rangefinder does not have IP protection. Ideal for DIY, construction, flooring, etc. It is possible to store 99 measurement results, backlit display. Accuracy: / - 2mm Laser type: 635nm Class II Dimensions: 118x54x26,5mm Batteries: 2x AAA 1,5V
On request62,38 € with VAT -
Analog durometer 20-100 Shore C
Analogue tester / shore meter / hardness soft rubber / rubber soft foam, soft foam elastomers, polystyrene and urethane foams, textile windings, pottery, shoes etc. Hardness measurement range: 20 - 100 Shore C Resistance: 1 Shore Type C: Hardened touch of diameter 5mm, with extended support base 30mm diameter Ball design - suitable where you do not want to leave a trace of measurement.
In stock119,90 € with VAT