Rotary table under the circular milling machine, type HV, VERTEX
Variant:
110mm / HV-4 |
In stock
(3x)
|
280,54 € with VAT |
150mm / HV-6 |
In stock
(3x)
|
296,32 € with VAT |
200mm / HV-8 |
In stock
(4x)
|
470,35 € with VAT |
250mm / HV-10 |
In stock
(4x)
|
583,32 € with VAT |
300mm / HV-12 |
In stock
(3x)
|
757,74 € with VAT |
350mm / HV-14 |
In stock
(2x)
|
1.008,17 € with VAT |
400mm / HV-16 |
On request
|
1.488,15 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- VERTEX
- Warranty:
- 24 months
Product information
Quality rotary dividing table - dividing table for milling machine
- circular table for three-jaw chuck
Horizontal and vertical clamping
Diameter of the table: according to the selected variant
There is a scale of 360° around the circumference of the turntable
Other dimensions - see product description for individual variants, or the attached catalog sheet
Nonius :
1 turn = turn by 4°
1 division = 1´ (one minute of degree)
Maximum resolution: 20´´ (20 seconds)
The turntable and vernier can be locked in the selected position.
The lower landing surface is ground, equipped for storing centering stones.
Vertex table grooves are suitable for clamping 3-jaw chucks, which is ideal for machining rotary parts. In the same way, four-jaw chucks can be easily clamped, which are suitable for machining squares and polygons (which is less common), but at the same time, they have lower accuracy (centering) when machining rotary parts - precisely because of clamping by 4 jaws. For this reason, we recommend always using a 3-jaw chuck - if possible.
On the market, you can find similar less precise tables with four grooves, but these are not ideal for clamping 3-jaw and 4-jaw chucks - clamping a chuck that has 3 clamping holes on 4 grooves is complicated - it is necessary to find / make an intermediate flange.
Horizontal and vertical clamping
Diameter of the table: according to the selected variant
There is a scale of 360° around the circumference of the turntable
Other dimensions - see product description for individual variants, or the attached catalog sheet
Nonius :
1 turn = turn by 4°
1 division = 1´ (one minute of degree)
Maximum resolution: 20´´ (20 seconds)
The turntable and vernier can be locked in the selected position.
The lower landing surface is ground, equipped for storing centering stones.
Vertex table grooves are suitable for clamping 3-jaw chucks, which is ideal for machining rotary parts. In the same way, four-jaw chucks can be easily clamped, which are suitable for machining squares and polygons (which is less common), but at the same time, they have lower accuracy (centering) when machining rotary parts - precisely because of clamping by 4 jaws. For this reason, we recommend always using a 3-jaw chuck - if possible.
On the market, you can find similar less precise tables with four grooves, but these are not ideal for clamping 3-jaw and 4-jaw chucks - clamping a chuck that has 3 clamping holes on 4 grooves is complicated - it is necessary to find / make an intermediate flange.
Variants
How do customers see us?
Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou).
"Super obchod. Velký výběr sortimentu a také rychlost dodání (do dvou dnů od objednávky-poštou)."
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!