Rotary table 110mm under the round milling machine, HV-4

Variant:

Choose variant

110mm / HV-4	In stock (3x)	278,09 € with VAT
150mm / HV-6	In stock (4x)	293,73 € with VAT
200mm / HV-8	In stock (4x)	466,24 € with VAT
250mm / HV-10	In stock (4x)	578,22 € with VAT
300mm / HV-12	In stock (3x)	751,11 € with VAT
350mm / HV-14	In stock (2x)	999,35 € with VAT
400mm / HV-16	On request	1.475,14 € with VAT

Current price:

278,09 € with VAT

229,83 € without VAT

In stock (3x)

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:: 1000000010442
Brand:: VERTEX
Warranty:: 24 months
Code:: 1001-000

Product information

High-quality rotary dividing table - 110 mm circular cutter
< 16 "or T11 / M10 or T11 / M8 nuts can be purchased - see" Related goods "
Clamping: Horizontal - 2 stones 12mm
Clamping: Vertical - 2 milled areas for clamps - Packaging)

Axial heights:
Vertical clamping: 80mm

Table height:
Horizontal clamping: 58mm
Vertical clamping: 138mm

Maximum allowable table load:
Horizontal clamping: 35kg
Vertical clamping: 18kg

Nonius: b>
1 turn = 4 ° rotation 1 dashes = 1 '(one minute)
Maximum resolution: 20'' (20 seconds)
Turn and nonius can be locked in the selected position .

In the middle of the plate is the centering hole MK2.
The bottom bearing surface is ground, equipped for storing center stones.

Order No.: 1001-000

Variants

110mm / HV-4

Code: 1001-000

In stock

278,09 € with VAT

150mm / HV-6

Code: 1001-001

In stock

293,73 € with VAT

200mm / HV-8

Code: 1001-002

In stock

466,24 € with VAT

250mm / HV-10

Code: 1001-003

In stock

578,22 € with VAT

300mm / HV-12

Code: 1001-004

In stock

751,11 € with VAT

350mm / HV-14

Code: 1001-005

In stock

999,35 € with VAT

400mm / HV-16

Code: 1001-006

On request

1.475,14 € with VAT

Show all variants

Accessories

Indirect dividing device for rotary and tilting table 100mm and 150mm, DP-1

Additional dividing devices (splitting discs) for comfortable and accurate angular cutting Max. diameter: 100mm Clamping hole: 22mm For rotating tables and dividers with diameters 100 to 150 mm - with knife ruler and locking pin Suitable for turntables HV-4, HV-6 and RT 100, RT 150 Ref. No. 1001-030

In stock

85,93 € with VAT

Choose variant
Height adjustable tailstock 80-108mm, TS-1

Axis: adjustable in the height range 80-108 mm, after turning the body it is possible to reduce the axial height to 46mm Possibility to adjust the angle of the inclination of the tip: -30 to 30 ° Fixed Tip: 28mm Base: 94x134mm Mounting Screws: max M14 Guide Groove Groove: 16mm Suitable for rotary tables and dividers: HV-4, HV-6, VSI- 4, VSI-5, BS-0, BS-0-J, VUT-6, VU-100, VU-150 Ord. No. 1001-022

In stock

160,18 € with VAT

Choose variant
Universal self-centering chuck TOS IUG 80 / 3-1 M2, ČSN 243809

Universal chuck IUG - TYPE 243809.0 80 / 3-1 M2 TOS Svitavy, TYPE 2438090083110 Diameter: 80mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 Chuck housing: Ductile iron Two universal jaw sets (1x internal and 1x outer) are supplied with universal. clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibrations at higher speeds mm F ± 0,2 67 mm G 3xM6 mm H 35,5 mm J 13 mm K 6 mm O 16,5 mm P 3 x 7 mm R 15 mm S 3 mm T 45 mm

In stock

279,21 € with VAT

Choose variant
Universal self-centering chuck TOS IUG 80 / 3-2 M2, ČSN 243809

Universal chuck IUG - TYPE 243809.0 80 / 3-2 M2 TOS Svitavy, TYPE 2438090083110 Diameter: 80mm Clamping: M2 Accuracy: "2" - Common turning accuracy Balanced spiral wheel reduces vibrations at higher speeds mm F ± 0,2 67 mm G 3xM6 mm H 35,5 mm J 13 mm K 6 mm O 16,5 mm P 3 x 7 mm R 15 mm S 3 mm T 45 mm

In stock

247,31 € with VAT

Choose variant
Guide stone for vice 12mm T20, ČSN 243595, hardened

Material: 12050 (structural steel), C45 - heat-treated - hardened ČSN 243595/24 3595

In stock

21,36 € with VAT
Nuts for inch T-slots T11 / M6, ČSN 021529

Nuts up to 7/16 "T grooves M6 T11 T-groove size 11mm, M6 thread Nut size: 18x18x13,9mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of rotary tables VERTEX 110mm and 150mm with groove 11mm

In stock

4,43 € with VAT

Choose variant
Guide stone for vice 12mm T18, ČSN 243595

Material: 12050 (structural steel), C45 - not thermally treated ČSN 243595/24 3595

On request

3,48 € with VAT
Nuts for inch T-slots T11 / M10, ČSN 021529

Nuts up to 7/16 "T grooves M10 T11 T-groove dimensions 11mm, M10 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of turntables VERTEX 110mm and 150mm with grooves 11mm

In stock

2,89 € with VAT

Choose variant
Nuts for inch T-slots T11 / M8, ČSN 021529

Nuts up to 7/16 "T grooves M8 T11 T-groove size 11mm, M8 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of VERTEX 110mm and 150mm rotary tables with grooves 11mm

In stock

4,43 € with VAT

Choose variant
Universal self-centering chuck KUS 80/3 M3, Kovonastroje

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 80 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

In stock

108,50 € with VAT

Choose variant