Rotary table 150mm under the round milling machine, HV-6

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 160 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, throwing - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.

Universal chuck IUG - TYPE 243809.0 160 / 3-1 M2 TOS Svitavy, TYPE 2438090163120 Diameter: 160mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 - Chuck housing: Ductile cast iron clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibrations at higher speeds HEM ??125 mm F ± 0,2 140 mm G 3xM10 mm H 66 mm J 23 mm K 9 mm L 108,4 mm N 71,4 mm O 22 mm P 3 x 11 mm R 42 mm S 4 mm T 62 mm U 67 mm Also suitable for rotary tables HV-6, HV-8 and larger.

Nuts up to 7/16 "T grooves M8 T11 T-groove size 11mm, M8 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of VERTEX 110mm and 150mm rotary tables with grooves 11mm

Nuts up to 7/16 "T grooves M10 T11 T-groove dimensions 11mm, M10 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of turntables VERTEX 110mm and 150mm with grooves 11mm

Universal chuck IUG - TYPE 243809.0 160 / 3-2 M2 TOS Svitavy, TYPE 2438090163220 Diameter: 160mm Clamping: M2 Accuracy: "2" - Conventional turning accuracy Balanced spiral wheel reduces vibrations at higher speeds HEM ??125 mm F ± 0,2 140 mm G 3xM10 mm H 66 mm J 23 mm K 9 mm L 108,4 mm N 71,4 mm O 22 mm P 3 x 11 mm R 42 mm S 4 mm T 62 mm U 67 mm Also suitable for rotary tables HV-6, HV-8 and larger.

Axis: adjustable in the height range 80-108 mm, after turning the body it is possible to reduce the axial height to 46mm Possibility to adjust the angle of the inclination of the tip: -30 to 30 ° Fixed Tip: 28mm Base: 94x134mm Mounting Screws: max M14 Guide Groove Groove: 16mm Suitable for rotary tables and dividers: HV-4, HV-6, VSI- 4, VSI-5, BS-0, BS-0-J, VUT-6, VU-100, VU-150 Ord. No. 1001-022

Additional dividing devices (splitting discs) for comfortable and accurate angular cutting Max. diameter: 100mm Clamping hole: 22mm For rotating tables and dividers with diameters 100 to 150 mm - with knife ruler and locking pin Suitable for turntables HV-4, HV-6 and RT 100, RT 150 Ref. No. 1001-030