Rotary table 250mm under the round milling machine, HV-10

T-slot nut M12 T14, T14/M12 Dimension of T-slot 14mm, thread M12 Dimensions of matrix: A: 13.9mm H: 16mm K: 7.8mm E: 28mm D : M12 Standard: ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat treated

Headstock for lathe, divider Axis: adjustable in the height range of 130-200 mm Possibility of setting the angle of inclination of the tip: -30 to +30° Stroke of fixed tip: 28mm Base: 185x140mm Groove for attaching screws: 17mm (M16) Centering groove for stones: 16mm Suitable for rotary tables and dividers: HV-10, HV-12, CS-8, CC-8, VUT-10, VUT-12, VU-200 Order no. no.: 1001-024

Universal chuck IUG - TYPE 243809.0 250 / 3-1 M2 TOS Svitavy, TYPE 2438090253120 Diameter: 250mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 Chuck housing: Ductile iron Two universal jaw sets (1x internal and 1x outer) are supplied with universal. clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibration at higher speed HEM ??200 mm F ± 0,2 224 mm G 3xM12 mm H 97,5 mm J 33 mm K 12 mm L 143,5 mm N 93 , 5 mm O 29.5 mm P 3 x 13 mm R 76 mm S 5 mm T 82 mm U 91 mm

Universal chuck IUG - TYPE 243809.0 250 / 3-2 M2 TOS Svitavy, TYPE 2438090253220 Diameter: 250mm Clamping: M2 Accuracy: "2" - Common turning accuracy Balanced spiral wheel reduces vibration at higher speed HEM ??200 mm F ± 0,2 224 mm G 3xM12 mm H 97,5 mm J 33 mm K 12 mm L 143,5 mm N 93 , 5 mm O 29.5 mm P 3 x 13 mm R 76 mm S 5 mm T 82 mm U 91 mm

Additional dividing devices (splitting discs) for comfortable and accurate angular cutting Max. diameter: 180mm Clamping hole: 28,7mm For rotating tables and dividers 250 to 400 mm diameter 2 splitting blades for splitting into 26-99 segments included Precision settings the selected step using the knife ruler and lock pin. Suitable for turntables HV-10, HV-12, HV-14, HV-16 Ref. No. 1001-032

Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 250 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, runout - see enclosed PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chassis is delivered in a wooden box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.