Rotary table 150mm under the round milling machine, HV-6
| 110mm / HV-4 |
In stock
(3x)
|
279,76 € with VAT |
| 150mm / HV-6 |
In stock
(3x)
|
295,49 € with VAT |
| 200mm / HV-8 |
In stock
(4x)
|
469,03 € with VAT |
| 250mm / HV-10 |
In stock
(4x)
|
581,68 € with VAT |
| 300mm / HV-12 |
In stock
(3x)
|
755,62 € with VAT |
| 350mm / HV-14 |
In stock
(2x)
|
1.005,35 € with VAT |
| 400mm / HV-16 |
On request
|
1.483,98 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000010459
- Brand:
- VERTEX
- Warranty:
- 24 months
- Code:
- 1001-001
Product information
Guide stones 2pcs: 16mm - not included! Stones need to be adjusted - the groove in the table is lower than the height of the stones according to the ČSN standard. b>
Axis heights:
Vertical clamping: 102mm
Table height:
Horizontal clamping: 78mm > Vertical clamping: 205mm
Maximum permissible table load:
Horizontal clamping: 40kg
Vertical clamping: 20kg
Nonius: b>
1 turn = 4 ° rotation 1 dashes = 1 '(one minute)
Maximum resolution: 20'' (20 seconds)
Turn and nonius can be locked in the selected position ..................... seating area is ground, equipped for storing centering stones.
Order No.: 1001-001
Variants
Accessories
-
Universal self-centering chuck KUS 160/3 M3, Kovonastroje
Three-purpose lathe chuck / universal with a set of external OJS and internal IJS jaws and a key Average w: 160 mm Clamping: M3(screws only from the front) Other dimensions and parameters - see attached PDF Accuracy, throwing - see attached PDF Other sets of internal and external jaws can be purchased - see related products. The chuck has a lubricator directly on the front of the chuck, we recommend the lubricant oil KV 100 during machining without rinsing or Vaseline Gleit 520HP 520TS / MOGUL CALSUL 2 WR when rinsing. The chuck is delivered in a paper box with a Czech manual. Including sets of Allen screws for clamping only from the front(type M3). Suitable for grinders, dividers, turntables, etc.
In stock162,18 € with VAT -
Universal self-centering chuck TOS IUG 160 / 3-1 M2, ČSN 243809
Universal chuck IUG - TYPE 243809.0 160 / 3-1 M2 TOS Svitavy, TYPE 2438090163120 Diameter: 160mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 - Chuck housing: Ductile cast iron clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibrations at higher speeds HEM ??125 mm F ± 0,2 140 mm G 3xM10 mm H 66 mm J 23 mm K 9 mm L 108,4 mm N 71,4 mm O 22 mm P 3 x 11 mm R 42 mm S 4 mm T 62 mm U 67 mm Also suitable for rotary tables HV-6, HV-8 and larger.
On request393,18 € with VAT -
Nuts for inch T-slots T11 / M8, ČSN 021529
Nuts up to 7/16 "T grooves M8 T11 T-groove size 11mm, M8 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of VERTEX 110mm and 150mm rotary tables with grooves 11mm
In stock4,45 € with VAT -
Nuts for inch T-slots T11 / M10, ČSN 021529
Nuts up to 7/16 "T grooves M10 T11 T-groove dimensions 11mm, M10 thread Nut size: 18x18x14,2mm ČSN 02 1529 / CSN 021529 or DIN 508 Material: Structural steel 12050 (C45), heat-treated Usage: Inner grooves of turntables VERTEX 110mm and 150mm with grooves 11mm
In stock3,15 € with VAT -
Universal self-centering chuck TOS IUG 160 / 3-2 M2, ČSN 243809
Universal chuck IUG - TYPE 243809.0 160 / 3-2 M2 TOS Svitavy, TYPE 2438090163220 Diameter: 160mm Clamping: M2 Accuracy: "2" - Conventional turning accuracy Balanced spiral wheel reduces vibrations at higher speeds HEM ??125 mm F ± 0,2 140 mm G 3xM10 mm H 66 mm J 23 mm K 9 mm L 108,4 mm N 71,4 mm O 22 mm P 3 x 11 mm R 42 mm S 4 mm T 62 mm U 67 mm Also suitable for rotary tables HV-6, HV-8 and larger.
In stock351,02 € with VAT -
Height adjustable tailstock 80-108mm, TS-1
Axis: adjustable in the height range 80-108 mm, after turning the body it is possible to reduce the axial height to 46mm Possibility to adjust the angle of the inclination of the tip: -30 to 30 ° Fixed Tip: 28mm Base: 94x134mm Mounting Screws: max M14 Guide Groove Groove: 16mm Suitable for rotary tables and dividers: HV-4, HV-6, VSI- 4, VSI-5, BS-0, BS-0-J, VUT-6, VU-100, VU-150 Ord. No. 1001-022
In stock161,14 € with VAT -
Indirect dividing device for rotary and tilting table 100mm and 150mm, DP-1
Additional dividing devices (splitting discs) for comfortable and accurate angular cutting Max. diameter: 100mm Clamping hole: 22mm For rotating tables and dividers with diameters 100 to 150 mm - with knife ruler and locking pin Suitable for turntables HV-4, HV-6 and RT 100, RT 150 Ref. No. 1001-030
In stock86,45 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!