Richmann

500ml Classic lubrication press with push cushions. There are two end caps. Lubricant can also be used on the cartridge. -

Lever riveting pliers frontal 300mm For steel, copper, aluminum and stainless steel rivets Gear mechanism enables riveting with lower control force. The package contains exchangeable heads for rivets with diameters of 2.4 / 3.2 / 4.0 / 4.8 / 6.0 / 6.4 mm

Reduction from 1/2" to 1/4" hollow head Inner square 1/2", outer square 1/4" Material: Cr-V, i.e. Chrome-Vanadium The transition is from the classic 12.7mm square to 6.35mm. Attention - the reduction is only suitable for screwing, it is not suitable for tightening and loosening! Improper use, i.e. tightening or loosening via 1/2" lever / beam / ratchet can destroy the reduction - twist the 1/4" square.¨ Take therefore, use this reducer only as an "emergency helper" when you don't have a 1/4" ratchet at hand and only use it for resistance-free screwing.

Wrench, impact, hexagonal Size: 17mm Total length: 160mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 19mm Total length: 160mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 21mm Total length: 160mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 22mm Total length: 160mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Wrench, impact, twelve Size: 24mm Total length: 160mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 26mm Total length: 180mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Wrench, impact, twelve Size: 27mm Total length: 180mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 30mm Total length: 190mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.

Spanner nut, impact, hexagonal Size: 32mm Total length: 195mm Material: made of chrome vanadium steel Cr-Mo Suitable for loosening rusted and hardened nuts. On the key it is possible to use rough treatment - pipe, hammer, etc.