Pliers for riveting
-
Drill rivet tool
Handy tool for riveting rivet nuts with drill and battery drill. For tools with tightening torque min. 20Nm Only suitable for aluminum rivets. Due to the design of the internal mechanism of the bit, choose the length of MAX blind rivets 6 mm longer than the riveted / joined material. Set includes Adapters for M4, M5, M6 Nuts 1/4 "(6,35mm) Hexagon Socket Hard Plastic Body Dimensions 59x147mm
In stock17,32 € with VAT -
Riveting attachment for a drill for rivet nuts, FORTUM
Reinforced T attachment, which allows you to rivet rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 made of Al, copper, steel, stainless steel - Maximum length of rivet nut: 12mm Recommended working speed for optimal performance: < 20min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm ( depending on the size and material of the rivet used). Material: CrMoV This adapter must not be used with any type of (impact) impact wrench, must not be used together with an impact function!
In stock98,39 € with VAT -
Riveting attachment for a drill for classic rivets and rivet nuts, FORTUM
Reinforced T-COMBO attachment, which allows riveting rivets and rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 from material Al, copper, steel, stainless steel For burst rivets: 2.4-6.4mm, or 2.4-3.2-4.0-4.8-6.0-6.4mm from Al, copper, steel, stainless steel * Maximum length of rivet / rivet nut: 12mm Recommended working speed for optimal performance: < 20 min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm (depending on the size and material of the rivet used). The riveting attachment of the T-COMBO set is basically ready for working with rivet nuts (nut rivets), because it has a nut work module installed from the factory. To work with burst rivets, it is necessary to replace this module and mount a working module intended for burst rivets (included in the delivery) in the extension. The replacement procedure is given in the attached instructions. Material: CrMoV This adapter must not be used with any type of impact wrench, must not be used together with the impact function!
In stock118,14 € with VAT -
Front riveting pliers 300mm, Richmann
Lever riveting pliers frontal 300mm For steel, copper, aluminum and stainless steel rivets Gear mechanism enables riveting with lower control force. The package contains exchangeable heads for rivets with diameters of 2.4 / 3.2 / 4.0 / 4.8 / 6.0 / 6.4 mm
On request16,21 € with VAT