Micrometers and pasameters

Interchangeable thread micrometer probes - for measuring British whitworth threads BSW(W), BSF, BSP(G) For thread measurement with pitch: according to the selected variant Touch angle: 55°

Caliber for setting the zero position of the thread micrometer Length: according to the selected variant Angle: 60°

Caliber for setting the zero position of the thread micrometer Length: according to the selected variant Angle: 55° (photo is illustrative)

Analog micrometer for interchangeable ball contacts Scope: according to the selected variant Division: 0.01mm Further information - see product description for individual variants Carbide ball contacts can be purchased additionally (diameter 1.0mm to 6.0mm), i.e. it is supplied without contacts - see related products

Digital micrometer for interchangeable ball contacts - for measuring gears Scope: according to the selected variant Division: 0.001mm Further information - see product description for individual variants Carbide ball contacts can be purchased additionally (diameter 1.0mm to 6.0mm), i.e. supplied without contacts.

Pair (2 pcs) of carbide replacement micrometer probes Diameter of touch - balls: according to the selected variant For module measurement: according to the selected variant Touches are intended for micrometers 906.750 to 906.757 / 909.889 to 909.896 - see attached photo

Digimatic three-meter micrometer with 2mm spindle feed and IP protection IP65(dustproofness and resistance to splashing water) and also COOLANT PROOF function(extreme resistance to cooling) liquids and oils) This micrometer is by : a ratchet with a pitch of 2 mm, which means 4 times faster measurement than in normal micrometer with a pitch of 0.5 mm. The dual function of the ratchet in the drum allows easy operation on a tripod or operation with one hand. The manufacturer states an extremely long battery life of up to 2.4 years for this model Measuring range: 0 - 25 mm Reading: 0.001 mm Carbide stylus diameter: 6.35 mm Accuracy: 0.001 mm Flatness: 0.003 mm Automatic shut-off after 20 minutes of non-use, incl. Including ABS function, HOLD Supplied: Including housing, wrenches, 1 battery, gauge(from 25 mm), inspection certificate(measuring range A… â „c enAf 0-50 mm)

Digimatic three-meter micrometer with 2mm spindle feed and IP protection IP65(dustproofness and resistance to splashing water) and also COOLANT PROOF function(extreme resistance to cooling) liquids and oils) This micrometer is by : a ratchet with a pitch of 2 mm, which means 4 times faster measurement than in normal micrometer with a pitch of 0.5 mm. The dual function of the ratchet in the drum allows easy operation on a tripod or operation with one hand. The manufacturer states an extremely long battery life of up to 2.4 years for this model Measuring range: 0 - 25 mm Reading: 0.001 mm Carbide stylus diameter: 6.35 mm Accuracy: 0.001 mm Flatness: 0.003 mm Automatic shut-off after 20 minutes of non-use, incl. Including ABS function, HOLD Supplied: Including housing, wrenches, 1 battery, gauge(from 25 mm), inspection certificate(measuring range A… â „c enAf 0-50 mm)

Digimatic three-meter micrometer(without data output) Measuring range: 0 - 25 mm Reading: 0,001mm Diameter Carbide stylus size: 6.35 mm Accuracy: 0.002 mm Flatness: 0.003 mm Measuring force: 5-10N Automatic shut-off Degree of protection: without IP

Two-piece set of clip micrometers with data output Measuring range: 0 - 25 mm; 25 - 50 mm Reading 0.001mm Tube Diameter Diameter: 6.35 mm Accuracy 0.001mm Degree of protection IP65 (anti splashing and dust proof) > Contains micrometers 293-230 and 293-231 and ceramic end gauge 130752 (25mm)

Three-point cavimeter 8.0-10.0mm INTRIMIC including calibration protocol Division 0.001 mm Accuracy: - 0.002 mm Accessories: Wooden case, screwdriver Photo is illustrative only

Three-dimensional micrometers in INTRIMIC set 3.5-6.5 mm range 0.001 mm splitting Each set contains calibration rings Accuracy - 0.002 mm In this set of hollow gauges is also a screwdriver and three-touch adjustment keys