Measuring stands and indicators
-
Indicators - gauges
-
Measuring stands
-
Magnetic bases
-
Arms for stands
-
Clamping screws
-
Clamping part mag. stands
-
Stand for dial indicators, ground base PN 251857
Gauge Gauge 25 1857 for gauges (fine gauge) - gentle set of indicator, with grinding base, non-magnetic Gripping eye: 8mm Base dimensions: 220x60mm (height 35mm) < - Fixed arm length from base: 215mm Length of sliding arm: 250mm (incl.
In stock80,16 € with VAT -
Magnetic stand for dial indicator, indicator - central aluminum
Manetized Dial Stand with Central Lock / Central Lock The arms are made of aluminum (ALU), making them lighter. One-screw central tightening. Clamping force of magnet 784N The end of the arm is fine, this is set separately. The magnetic base is from the bottom of the prism. Base Dimensions: 50x60mm Max. arm length from base to tailgate: 275mm
In stock35,22 € with VAT -
Magnetic MINI stand for dial indicator, indicator - central aluminum
Small Compact ALU Dispenser Stand with Central Lock / Central Lock The arms are made of Aluminum, making them lighter One-screw Central Tightening. Magnetic base from the bottom of the prism - top of the base along the axis of the clamping hole of the indicator: 145mm (indicates the distance when the arms are in the plane, ie the maximum length of the arm) Indicators are not included. You can find them in the "Gauges", "Indicators - Gauges" section: http://www.kovonastroje.cz/Meridla/Indikatory-uchylkomery/
On request28,04 € with VAT -
Magnetic stand for dial indicator, indicator - central hydraulic, L = 380mm
Hydraulic stand for indicators with magnetic base and central locking / central locking Distance from table top to clamping eye for indicator: 420mm Magnetic compression: 784N Magnet dimensions: 50x60mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Thanks to the hydraulic design, the stand is more accurate and sturdy. The magnetic base is from the bottom of the prism. Hydraulic stands should NOT be stored tight (eg overnight). The stand should not be tightened for more than 5 hours.
In stock48,04 € with VAT -
Repair set of seals for hydraulic stand
The set is suitable for repairing the stand RT_MS_HY - see related products. There is no guarantee that it will be suitable for stands of another brand / seller! Set contains: 2x rubber ring 3,68x1,78mm 1x rubber ring 14x3mm 2x rubber ring 8x2mm 1x rubber ring 7x2mm 1x 50ml - hydraulic oil SHELL Tellus SV V 32 Price is per set only. If you are interested in hanging the stands with us, the total price of the repair is 180 CZK without VAT.
On request1,77 € with VAT -
Stand for dial indicator, indicator - central with suction cup
Home Vacuum indicators stand - with a vacuum / suction base and central detent / Home central locking arms are made of aluminum Home distance from the table top after a clamping lug for lamp: 310 mm Length of arms Home: 260 mm (110 150mm) Suction cup diameter: 90mm Suction cup height: 20mm Centrally tighten one screw. At the end of the upper arm is a fine building that is sewn separately. Vacuum clamping, suitable for clamping on degreased, clean and flat surfaces, and wherever a magnetic stand can not be used.
In stock31,70 € with VAT -
Magnetic stand for dial indicator, indicator - classic, 80kg
Indicator holder, magnetic stand for indicators, gauges Pressure: 80 kg (800N) Base dimensions: 63x50x55 Shoulder length: 175mm fixed and 150mm adjustable Classic stand for indicators, screws, soft construction In this stand the indicator can be clamped behind its cylindrical part (diameter 8mm), but also behind the tab if the indicator is equipped with it. Dial indicators / indicators are not included. You can find them in the "Gauges", "Indicators - Gauges" section: http://www.kovonastroje.cz/Meridla/Indikatory-uchylkomery/
In stock15,96 € with VAT