Measuring stands and indicators

Setin dial indicator, dial gauge (watch) with 60mm alarm clock, step 0-5mm. This idiomer is the front - the touch is 90 degrees to the alarm clock - see the other photo Diameter of the clamping part is 8mm. Alarm Clock 0.01mm.

Pivot Holder for Gauges 3 Joints, Lock 1 Screw Length 150mm Stopper 8mm

Indicator holder, magnetic stand for indicators, deflection meters with central locking / central locking For indicators with clamping diameter: 8mm (can be clamped behind a prism) Length of arms: 335mm (arms 160mm and 175mm) Pressure 588N Dimensions of the base: 63x50x55 With this type of stand, you lock all the joints with one screw, delicate construction The indicator can be attached to this stand by its cylindrical part (diameter 8mm), but also by the lug, if the indicator is equipped with it.

Indicator holder, magnetic stand for indicators, gauges, single bolt locking, fine construction. Indicator not included - can be purchased Pressure: 294N Indicator clamping: pr. 6 and 8mm or under the strap Base dimensions: 55x42x48mm The stand can be fastened to the underside of the base (mild prism) and also to the side prisms. Magnet switches on with the top rotary switch. The boom can be tilted slightly by using the gently adjustable handle (see photo). Rotate the handle slightly to tilt (up or down). Standard: PN 251858.1 / 25 1858.1

Clamping arm for magnetic stand - Fine construction Thread: M8 Indicator clamping: 6 and 8mm or behind the strap Shoulder length: 12x190mm and 10x190mm The boom can be slightly tilted with a soft grip = gripped handle (see photo). Rotate the handle slightly to tilt (up or down). Standard: PN 251858.1 / 25 1858.1

Setin dial gauge - pupitas with extended touch Alarm clock diameter: 38mm Resolution: 0,01mm Measuring step: 0,8mm Body length: 42mm < br> Adapters for 3-Axis Mounting. ČSN 251820 Each indicator has its serial number.

Toggle Toggle Digital 1x0,01mm with Ruby Touch Accuracy: / - 0.02mm Ribbed Diameter: 2mm Movement Lever: 230 ° Adjustable Tolerance Intervals. The gauge is fitted with 3-sided clamping strips. Dimensions: Display part with buttons (W x H): 47 x 32mm Total (without touch): 47 x 70mm, depth 30mm

Spherometer / Meter for measuring radius of spherical bodies with analog indicator Range: R15 - R100 Indicator splitting: 0,01mm Accuracy: / - 5%, further depending on accuracy / measurement error - human factor Touch face "2b": 20mm Usage: 1. Reset the indicator by turning the scale - on a flat pad (always zero on a small scale !!!) 2. Write the measured value "s". 3. Use radius calculation formula - see enclosed photo. Suitable for measuring radii in inaccessible places or when it is not possible to measure the radius easily. Furthermore, for measuring convex and concave lenses.

Spherometer / measuring instrument for measuring radius of cylindrical and spherical bodies with digital indicator Range: R100 - R1000 Indicator splitting: 0.001mm Accuracy: / - 5%, depends on on accuracy / measurement error - human factor : 1. Reset Indicator on Straight Plate 2. Write the measured value "s". 3. Use radius calculation formula - see enclosed photo (b = 20). Suitable for measuring radii in inaccessible places or when it is not possible to measure the radius easily. This design is suitable for shaft measurements.

Prismatic In Cube Length (Prism): 70mm Width: 60mm Height: 73mm Mag. Depth: 70kg Primer angle: 90 ° Primer width (min): 5mm Primer width (max): 37mm Primer height: 15,46mm Primer height (incl. grooves): 19mm

Replacement Touch to Dial Indicator. Clamping on thread M 2.5. The length of the contact (without thread) is 20mm. The touch is finished with a flat pr. 2mm

Replacement Touch to Dial Indicator. Clamping on thread M 2.5. Length of touch (without thread) is 7mm. The touch is finished with a flat pr. 2,5mm