Measuring instruments
-
Mitutoyo measuring instruments
-
Calipers
-
Micrometers and pasameters
-
Depth and cavity gauges
-
Measuring stands and indicators
-
Measuring boards and tables
-
Altimeters and drafts
-
Inspection pads and instruments
-
Probes and centrifuges
-
Gauges, templates and calipers
-
Protractors, Buffers, Scales, Rulers
-
Special measuring tools
-
Control drawing pad - pair, VERTEX
Pair of unused prism cubes with 1 notch from Vertex ( V-cube backing without yoke / prismatic cube ) Dimensions (dimensions according to the attached photo): L: according to the selected variant W : according to the selected variant H : according to the selected variant Other dimensions - see the attached table The accuracy of the flatness of the prismatic grooves for a pair: up to 0.05mm (with a max. distance of the cubes 300mm apart) The price is for a pair - i.e. for 2 cubes
from 21,22 € with VAT -
Precise angle with edge blade , VERTEX
Exact hair angle Dimensions: according to the selected variant An angle with an exact right angle (internal and external). Made from one piece of steel Precisely ground for parallelism Accuracy class H Certified to 55 Rockwell Supplied in a wooden box.
from 51,22 € with VAT -
Stainless steel flat scale, XT-Line
Stainless steel flat scale, stamped scale, numbers on the scale are stamped in centimeter values Length: according to the selected variant On the back there is a conversion table from inches to millimeters and an overview of the required hole diameters for individual M and W threads
from 1,55 € with VAT -
Precise angle with edge blade DIN875/00, KMITEX
Precise angle knife Dimensions: according to the selected variant Other dimensions - see the attached catalog sheet An angle with an exact right angle (internal and external). Made from one piece of steel Precisely ground for parallelism Accuracy class 00 Supplied in a wooden box.
from 28,44 € with VAT -
Stainless steel flat scale, FESTA
Stainless steel flat scale, stamped scale, numbers on the scale are stamped in millimeter values Length: according to the selected variant On the back there is a conversion table from inches to millimeters and an overview of the required hole diameters for individual M and W threads
from 1,79 € with VAT -
Digitální posuvné měřítko ABS , Accurata
Recommended ✓Digital gauge / slider / slider with flat depth gauge and data output Scope: according to the selected variant Division: 0.01mm Battery: LR44 (1x included in the package) Data output: 5-pin Accuracy: 0.02mm up to 130mm / 0.03mm over 130mm / according to DIN862 Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each of these scales meets the accuracy of DIN862 It is possible to issue a calibration protocol for each of these scales. Each piece of this slide is additionally checked before shipping with a 22.50mm SOMET check gauge and a 37.001 Schmalkalden check ring directly at our store.
from 29,84 € with VAT -
Calibrated ABS digital caliper , Accurata
Calibrated digital gauge / slide / slide with flat depth gauge and data output Scope: according to the selected variant Division: 0.01mm Battery: LR44 (1x included in the package) Data output: 5-pin Accuracy: 0.02mm up to 130mm / 0.03mm over 130mm / according to DIN862 Four buttons. Measurement with absolute zero. Extra fine slide, finely lapped slide bar. Czech instructions attached. Each of these scales is manufactured under a unique serial number. Each of these scales meets the accuracy of DIN862 The calibration protocol is from an accredited calibration laboratory.
from 38,68 € with VAT -
Precise angle with edge blade CSN 255103 typ E, KMITEX
Precise angle knife Dimensions: according to the selected variant Other dimensions - see the attached catalog sheet An angle with an exact right angle (internal and external). Made from one piece of steel Precisely ground for parallelism Accuracy class 00 Supplied in a wooden box.
from 61,82 € with VAT -
Digital caliper with external top tips
Sliding gauge digital double-sided with fine adjustment, with upper tips for external measurement Scope: according to the selected variant Length of the lower jaws: according to the selected variant Division: 0.01mm Portability: according to DIN862 Possibility of internal measurement with lower jaws from a diameter of 20mm Possibility to set ABS absolute zero Switching to inches / millimeters The display remembers the value even after switching off.
from 294,62 € with VAT -
Control pad with clamp
V-cube with yoke - 1pc, control drawing prism cube with yoke Prism length: according to the selected variant Cube width: according to the selected variant Dice height: according to the selected variant Clamping range: see product description for individual variants DIN876/1
from 29,75 € with VAT