Gauges

Welding gauge, welding gauge, welding grip, gauge welding gauge, gauge seam gauge, caliper Material INOX Measuring range 0-20mm Scaling: 0,1mm Angles: 60 °, 70 °, 80 °, 90 ° Screw locking. Standard: ČSN 253921 Flattened welds are read on the scale / side with the locking screw, in the cut welds are read on the scale / side without the locking screw.

Measuring wires - hole gauge, hole gauge, holes Dimensions: 1,50 - 1,60-1,70-1,80-1,90-2,0-2,1- 2,20-2,30-2,40-2,50-2,60-2,70-2,80-2,90-3,0mm Wire length is 5mm

Dies, is also the manufacturer's certificate with the evaluation of individual gauges. The quality of these gauges is - I. This gauge is marked with one horizontal line. This gauge calibration is designed for metrological plants where these gauges are used as standard business standards such as calibration, setting of very precise measuring instruments and gauges, etc. Gauge sets include: 1.0005 mm (1pcs in total) 1.001 - 1.009 x 0.001 mm (9pcs in total) 1.01 - 1.49 x 0.01 mm (49pcs in total) 0.5 - 24.5 x 0.5 mm (total 49pcs) 25 - 100 x 25 mm (4pcs in total)

End gauges, called "Johansonky" or basic gauges The set contains 47 gauges with an accuracy of 0. The gauges are made of special alloy steel, accuracy according to DIN 861, gauge hardness min. 64 HRc, included in the delivery there is also a manufacturer's certificate with the evaluation of individual gauges. The quality of these gauges is - 0. This is indicated by one horizontal line on the gauge. This calibration version of the gauges is intended for calibration laboratories. The set includes gauges: 1.005 mm (total 1pc) 1.01 - 1.09 x 0.01 mm (total 9pc) 1.1 - 1.9 x 0.01 mm (total 9 pcs) 1.0 - 24.0 x 1.0 mm (total 24 pcs) 25 - 100 x 25 mm (total 4 pcs)

Measuring instruments, is also the manufacturer's certificate with the evaluation of individual gauges. The quality of these gauges is - I. This gauge is marked with one horizontal line. This gauge calibration is designed for metrological plants, where these gauges are used as standard business standards, for example calibration, setting of very precise measuring instruments and gauges, etc. Gauge sets include: 1.005 mm 1pcs) 1,01 - 1,09 x 0,01 mm (9pcs in total) 1,1 - 1,9 x 0,01 mm (9pcs in total) 1,0 - 24,0 x 1,0 mm (total 24pcs) 25 - 100 x 25 mm (4pcs in total)

is also the manufacturer's certificate with the evaluation of individual gauges. The quality of these gauges is - I. This gauge is marked with one horizontal line. This gauge calibration is designed for metrological plants, where these gauges are used as standard business standards, for example calibration, setting of very precise measuring instruments and gauges, etc. Gauge set includes gauges: 1 , 0005 mm (1pcs in total) 1.001 - 1.009 x 0.001 mm (9pcs in total) 1.01 - 1.49 x 0.01 mm (49pcs in total) 0.5 - 9.5 x 0,5 mm (total 19pcs) 10 - 100 x 10 mm (10pcs in total)

is also the manufacturer's certificate with the evaluation of individual gauges. These gauge blocks are Class II accuracy - they are designed for control. The dash is marked with two equally long horizontal lines. This design is intended for control workplaces with less accuracy, control of workshop gauges, measuring instruments and verification of length dimensions directly in production. Dies are completely new, unused. Accuracy according to DIN EN ISO 3650 1.0005 mm (1pcs in total) 1.001 - 1.009 x 0.001 mm (total 9pcs) 1.01 - 1,49 x 0,01 mm (total 49 pcs) 0,5 - 9,5 x 0,5 mm (19pcs in total) 10 - 100 x 10 mm (10pcs in total)

Welding gauge, welding gauge, welding gauge, gauge welding gauge, welding gauge, gauge INOX material Measuring range 0-20mm Scaling: 0,01mm Angles: 60 °, 70 °, 80 °, 90 ° Screw locking. Standard: ČSN 253921 Flattened welds are read on the scale / side with the locking screw, in the cut welds are read on the scale / side without the locking screw.

Welding gauge, welding gauge, welding grip, gauge welding gauge, gauge seam gauge, caliper Material INOX Measuring range 0-20mm Scaling: 0,1mm Angles: 60 °, 70 °, 80 °, 90 ° Screw locking. Standard: ČSN 253921 Flattened welds are read on the scale / side with the locking screw, in the cut welds are read on the scale / side without the locking screw.

Measuring wires - hole gauge, hole gauge, holes, nozzles Dimensions: 0,45-0,50-0,55-0,60-0,65-0,70-0, 75-0,80-0,85-0,90-0,95-1,00-1,05-1,10-1,15-1,20-1,25-1,30-1,40- 1,50 The length of the wires is 5mm

Measuring wires - hole gauge, hole gauge, holes, nozzles Dimensions: 1,50 - 1,60-1,70-1,80-1,90-2,0-2, 1-2,20-2,30-2,40-2,50-2,60-2,70-2,80-2,90-3,0mm Wire length is 5mm

1.0005 mm (1 pc ) 1.001 - 1.009 x 0.001 mm (9pcs in total) 1.01 - 1.49 x 0.01 mm (49pcs in total) 0.5 - 24.5 x 0.5 mm (total 49pcs) 25 - 100 x 25 mm (4pcs in total) Accuracy according to DIN EN ISO 3650 Gauges are made of special alloy steel, accuracy according to DIN 861, hardness of gauges min. 64 HRc, the manufacturer's certificate is also included with the evaluation of the individual gauges. These gauge blocks are precision classes I - they are designed for calibration. On the dipstick this is indicated by one horizontal line. This gauge calibration is designed for metrological plants where these gauges are used as standard business standards, for example calibration, setting of very precise gauges and gauges etc.