FORTUM

Pliers: 40-100mm Overall length : 240mm Tip height: 2mm, length of tips: ..mm Material: CrV 6140, ie Chrome-Vanadium Very comfortable Rubber Handle

Reinforced T attachment, which allows you to rivet rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 made of Al, copper, steel, stainless steel - Maximum length of rivet nut: 12mm Recommended working speed for optimal performance: < 20min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm ( depending on the size and material of the rivet used). Material: CrMoV This adapter must not be used with any type of (impact) impact wrench, must not be used together with an impact function!

Reinforced T-COMBO attachment, which allows riveting rivets and rivet nuts with the help of a drill. For rivet nuts: M3-M12, or M3-M4-M5-M6-M8-M10-M12 from material Al, copper, steel, stainless steel For burst rivets: 2.4-6.4mm, or 2.4-3.2-4.0-4.8-6.0-6.4mm from Al, copper, steel, stainless steel * Maximum length of rivet / rivet nut: 12mm Recommended working speed for optimal performance: < 20 min-1 Hexagon for clamping in the drill: 8mm For work, it is possible to use tools with the required torque, e.g. cordless screwdriver, electric a 230V drill or a pneumatic drill in the range of 2Nm to 22Nm (depending on the size and material of the rivet used). The riveting attachment of the T-COMBO set is basically ready for working with rivet nuts (nut rivets), because it has a nut work module installed from the factory. To work with burst rivets, it is necessary to replace this module and mount a working module intended for burst rivets (included in the delivery) in the extension. The replacement procedure is given in the attached instructions. Material: CrMoV This adapter must not be used with any type of impact wrench, must not be used together with the impact function!

High-quality adjustable key with ultra-thin forged jaw Range: M2 to M16 (M2-M16) Material: Chromium-vanadium steel class 61CrV5, hardened and hard-

Safety non-breaking knife Blade width 19mm A total of 4 spare blades in a package(3pcs in a magazine). Extra hard blade made of SK2 material. The blade can be fixed in three positions: 90°, 135°, 180°.

Industrial joint extension - cardan 1/2" Total length: 64mm Outer diameter: 31mm Joint movement: up to 30° Max. tightening torque: 614Nm Material: Cr-Mo

Pneumatic straight grinder Pneumatic straight grinder is designed for demanding work in welding and poorly machined jobs, but also for fine grinding, deburring, milling and engraving. The tool allows you to replace and mount clamping clamps to hold tools with a 6 or 3 mm shank diameter. High precision production and quality materials guarantee lower vibration at work, higher performance and longer service life than conventional wrenches Composite body grinder is pleasantly holding and waking Adjustable air exhaust Continuous speed adjustment Main Technical parameters: Shank diameter: 6 or 3mm Length: 170mm Speed ??without load: 25000 / min Air consumption: 120l / min max. working pressure: 6.3bar (0.63 MPa) Nipple diameter: 1/4 " weight: 0.39kg

Spare blades for non-folding knives Blade size: 61 x 19mm; thickness 0,5mm For knives: 4780031 745107, 8855000, 8855001, 8855020 Very hard breaking edge with 64HRC made of material SK4 with gradual 3x ground blade extends the life of the blade up to 3x compared to commonly used steel blades with a higher carbon content; the thickness of the blade is 0.5mm