Homepage Processing of building material Drill bits for masonry and concrete

Drill bits for masonry and concrete

Product count: 13
  • Diamond hole crown saw , Stavtool

    Diamond hole crown saw , Stavtool

    Diamond drill bit for ceramic paving, tiling, basalt paving, etc. Diameter of the crown: according to the selected variant Clamping driver can be found in related products. It is a hobby design for soft paving

    from 2,03 € with VAT
  • Diamond hole saw crown for angle grinder, XT-Line

    Diamond hole saw crown for angle grinder, XT-Line

    Diamond drill bit for ceramic paving, tiling, basalt paving, concrete, marble, etc. Diameter of the crown: according to the selected variant Clamping thread: M14 (M14x2.0) Max. speed: 10,000 rpm Diamond layer height: 10mm Max. drilling depth: 25mm

    from 6,52 € with VAT
  • Drill bit 73mm with SDS, Extol Craft

    Drill bit 73mm with SDS, Extol Craft

    Drill Bit with SDS End Crown Diameter: 73mm Clamping Pins with 15.3mm Thread Stopper Length (Including Thread) 100mm, Overall Length 170mm Suitable for Drilling into Masonry and concrete

    In stock
    14,80 € with VAT
  • Drill bit 80mm with hexagon

    Drill bit 80mm with hexagon

    Drilling Hole with Hex End Diameter: 80mm Stopper Length (Including Thread) 100mm, Overall Length 170mm Suitable for Drilling in Masonry & Concrete HEX Clamping - Hexagonal Clamping Thimble has a 22mm diameter thread

    In stock
    11,87 € with VAT
  • Drill bit 65mm with hexagon

    Drill bit 65mm with hexagon

    Drill Bit with Hex End Diameter: 65mm Stopper Length (Including Thread) 100mm, Overall Length 170mm Suitable for Drilling in Masonry & Concrete HEX Clamping - Hexagonal Clamping Thimble has a 22mm diameter thread

    In stock
    9,66 € with VAT
  • Drill bit 80mm SDS

    Drill bit 80mm SDS

    Crown drilling in concrete with a sds and a diameter of 80mm. Suitable for drilling in masonry and concrete Clamping pin has a 22mm diameter thread Stopper length (including thread) 100mm, total length 170mm Suitable for drilling in masonry and concrete

    In stock
    11,41 € with VAT
  • Extended mandrel for drill bits, SDS

    Extended mandrel for drill bits, SDS

    Thorn for clamping of drilling crowns into masonry. Trn SDS Overall length: 300mm

    On request
    6,15 € with VAT
  • Drill bit 75mm with SDS

    Drill bit 75mm with SDS

    Drill Bit with SDS End Diameter: 75mm Clamping Pin with 22mm Diameter Stopper Length (Including Thread) 100mm, Overall Length 170mm Suitable for drilling in masonry and concrete

    In stock
    12,31 € with VAT
  • SDS Max / SDS reduction

    SDS Max / SDS reduction

    REDUCTION IN SDS Drill Drills Max. With this adapter you will also be able to clamp the SDS drill bit into your SDS Max drill bit SDS Max adapter on SDS plus Overall length: 225mm

    In stock
    12,27 € with VAT
  • Mandrel for drill bits, short SDS

    Mandrel for drill bits, short SDS

    Mandrel for clamping drill bits into masonry. Mandrel SDS Total length: 180mm

    In stock
    6,45 € with VAT
  • Driver 33-83mm for Stavtool diamond crowns

    Driver 33-83mm for Stavtool diamond crowns

    Driver for diamond drill bits Range: 33-83 mm Hexagon size for drill bit: 9mm You simply insert the bit and secure it in the grooves - see 2nd photo The centering drill is purchased separately - see related products

    On request
    3,11 € with VAT
  • Centering drill for Stavtool diamond crowns

    Centering drill for Stavtool diamond crowns

    Centering drill for diamond drill bits driver Hexagon: 9mm Drivers can be found in the related products section

    On request
    1,78 € with VAT

Drill bits for masonry and concrete