Česká výroba 202x

Rigid tilting table for a machine vice with a jaw width of up to 200mm, with supports ensuring vibration-free machining. Tilting range: 0-90° Dimensions of the base: Length: 355mm Width: 190mm Slots for clamping screws: 16mm ( ie for screw M14 or M12) Spacing of screws for clamping the table (longitudinally) : 320-340mm Spacing of screws for clamping the table (crosswise) : 140-170mm Dimensions upper plates: Length: 308mm Width: 190mm Spacing of screws for clamping (width) : 108mm and 138mm Spacing of screws for clamping (to length) : 165mm and 188mm Total height of the table: 150mm Height of the plates - i.e. base and top plate: 35mm Allen locking screws: hexagon 10mm (key not included in the package) Parts the package includes 2 guide stones 14mm T14, if you need others, you can buy more - see related products The package also includes a tightening 19mm flat key securing prismatic tilting. When using the fifth wheel, it is rotatable 0-360°. The table has setting grooves 14 H8 on the base and on the top plate - see photos A vice can be clamped on the table with a jaw width of up to 200mm. The tilt accuracy is ensured by prisms and a scale. We recommend using a dig along with the table. inclinometer for easier adjustment. Table weight: 40kg Usage: For clamping vices according to ČSN 243135 and ČSN 243136 - see related products Maintenance: lubricate with corrosion-resistant oil, which is suitable for long-term storage

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 80mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Semi-finished flange for clamping universal chuck, for lathe MN 80 Diameter of flange: 100mm Flange is without machined mounting and without holes for chuck clamping. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4

Semi-finished flange for clamping the universal chuck, for lathe MN 80 Diameter of the flange: 125mm The flange is without a machined fitting and without holes for clamping the chuck. A chuck of any brand/manufacturer can be clamped onto this flange after its additional modification. Material: Steel Thread: M 39Af4