Česká výroba 2022

Precise multiple self-centering vise made in the Czech Republic, precise, rigid design Jaw width: 100mm Height of jaws: 35mm Max. opening : 2x84mm (without center jaw 13-269mm) Vise height : 95mm Total length of vice : 410mm (435mm) Clamping force : 4-30 kN (- for force tightening 30kN, it is necessary to tighten the hexagon to 120Nm) Flatness of the bed to the work table: -0.002mm Max. height deviation of the bed compared to the other piece of this vise : -0.01mm Hexagon for handle : 12mm (handle is not included in the package) Groove for guide stones : 20mm (stones are not included in the package) Material: high-quality alloy steel. Beds and jaws nitrided 63HRC. The vise is designed for precise work on milling machines, EDM machines and CNC machining centers. The precision of the processing makes it possible to use several vices to clamp one piece of larger dimensions. The end jaws are movable, in the case of two different parts, the vise centers itself and clamps both parts. The package includes: 4 pcs clamping block ( for M16 or M12 screws) 3 pcs spare plates under the jaws ( prevent chips from entering the vice mechanism) Not included in the package : Handle, guide stones, nut clamping screws, T-nut - these need to be purchased separately. Instead of a handle, we recommend buying a gola head and a torque wrench up to 120Nm - see related products It is possible to purchase additional jaws, a set of clamping screws, stops, a brake against falling jaws ( for vertical clamping of the vice) to the vice - see related products .

The brake serves to secure the outer jaws when the vise is in a vertical position. I.e. serves to prevent the jaws from moving when you want to insert the workpiece. See the attached photos for more.

Adjustable stop for vice 2SN-100-80-270-35 Rod length: 90mm Thread: M8

Jaw width: 100mm Setting: 3x3mm Material: heat-treated alloy steel

Width of the jaws: 100mm Material: raw alloy steel You can machine the jaws as you wish, width 20mm.

Set of 4 clamping screws with T-nut (see photo) T-Nut : T18 mm (width of the upper part of the nut) Screw : M16 If you need another assembly of screws with T-nuts, let us know - we will replace according to your needs (eg. T14/M12, T20/M16, T22/M16, etc.)

Width of jaws: 100mm Setting: 3x3mm Width of teeth for setting (tooth - tooth): 6mm, depth approx. 2mm Material: heat-treated alloy steel