Česká výroba 201x

Intermediate flange for universal jaw TOS IUS for Chinese lathes series 300 For chucks: IUS 100mm Diameter of flange: 100mm Material: Steel Lathe spindle mounting: Mounting: 55mm Screw axis: 66mm(3x M6) < br> Chuck mounting: Suitable for TOS IUS 100/3 or TOS IUS 100/4 chuck mounting Suitable for lathes Series 300 - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate screw is screwed directly onto the spindle lathe. Before purchasing this flange, remove the flange from the lathe and change the mounting

Intermediate flange for universal chisel PIECE for Chinese lathes series 300 For chucks: PIECE 125mm Diameter of flange: 125mm Material: Steel Lathe spindle mounting: < / b> Mounting: 55mm Screw axis: 66mm(3x M6) Chuck mounting: Suitable for chuck clamping KUS 125/3 or KUS 125/4 Suitable for 300 series lathes - brands Asist, Proma, Einhell, Sieg, Rotwerk, CQ, MB, JET and lots of other clones The intermediate flange is screwed directly onto the lathe spindle. Before purchasing this flange, remove the flange from the lathe and change the mounting

Metric Reduction 24K MK2 Metric Cone for Lathe Spindle Max. diameter - cylindrical part: 30,5mm (x height 19,8mm) Overall length: 69mm Use: - lathe Suitable for lathes: MN80

MN 80 Spindle Pin / Coupling for MN 80 Lathe - that the wheel assembly is solid and free of play. The clutch hole is 10H7, the 4mm pen is recessed into the body. This part complements the toothed basic twin wheel 30/20 and also the toothed wheel 30z. Clutch diameter for couplings is 14mm, identical to gearing gears for lathe MN 80

Bronze nut for the sliding screw of the longitudinal movement of the main support. Unlike the original switch nut, which is cast iron, this is a bronze, with a thread cut in a coaxial pair of both halves of the nut.

Milling support for lathe Clamping surface 70x150mm Axial displacement about 80mm 1 piece nonius 0,02mm, 1x turn = 1mm Slot: 3xT10 Distance from rear edge to axis hole: 32.8mm, hole 10mm Bronze nut Adjustable support for the base of the locking base Adjustable axial clearance of the bolt bearing The surfaces of the preparation are carefully angled and ground, all sliding functional surfaces are scraped Material: Angle holder and T-slot table is made of CG25 gray cast iron Nonius, crank and fastener is made of steel Feed screw is made of strong steel < br> Usage: MN80 lathe, or even for other lathes. a high-quality massive product, an absolute perpendicular clamping, supporting and working surfaces and a very smooth running is a matter of course. The workpiece can be clamped over the T grooves with nuts or other accessories (cross divider, vice, etc.) can be screwed onto the table perpendicularly or even longitudinally on the spindle axis.

24z and 30z gear wheels for the MN 80 lathe In addition to the original, these wheels have an enlarged hole with sliding bronze which is pressed under huge pressure. Toothed is very courageous. Everything cut. Inner hole: 10mm Wheel force: 10mm Outside diameter: 26mm and 32mm

Knife head for lathe MN 80 Dimensions: 62x62mm Height: 34mm (without screws) Screws: 8 x M8 Pin: 10mm Material: Steel

Complete set of 20 gears for lathe MN-80 for cutting metric, whithwort, modular and diametral pitch(DP) threads. Rolled, material 12 050(C45) Number of teeth in module 1: 25, 25, 30, 35, 38, 40, 44, 45, 50, 55, 56, 57, 60, 64, 65, 70, 72, 75, 80, 90 Dimensions: module 1 up. hole: 14H7 thickness 8 mm groove 4mm For these gears for the composition of the exchange double transmission, you also need Bronze wheel clutch B and C(see related products). In addition, a basic gear wheel 30/20 of(, see related products), which provides a primary gear set in a gear unit worth 20z. To cut a thread where wheel A contains a value other than 20 teeth, you need a gear thread with 30 teeth(see related products) as a tray for wheel A.

Gear wheel - 50 teeth - for the MN-80 lathe for cutting metric, whitwort, modular and diametral pitch (DP) threads. Made by rolling, material 12 050 (C45) Number of teeth in module 1: 55 Dimensions: module 1 up. hole : 14H7 thickness 8mm groove 4mm Bronze wheel coupling B and C (see related products) are also needed for this gear for the interchangeable double gear composition. Furthermore, a basic 30/20z cog (, see related products), is required for a functional transmission, which provides a primary transmission in an assembly with a cog worth 20z. For thread cutting, where wheel A contains a value other than 20 teeth, a thread gear with 30 teeth (see related products) is needed as a tray for wheel A.

MN 80 - The toothed gear is very precisely chopped and the chosen production technology ensures the zero rolling of the wheel rims to each other. Everything cut.

Gear diameter: 21.8mm Shaft diameter: 15mm Length: 90mm