VERTEX
-
Plug-in copy cutter for RDMT 10T3 inserts , VERTEX
Front milling head for replaceable inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type VBD - triangular positive: according to the selected variant - type RDMT 10T3 The packaging is without VBD Suitable for small removal - leveling of surfaces, large areas, etc.
from 80,94 € with VAT -
Key for Vertex drill chuck
Handle for VERTEX drill chuck Dimensions: Pin diameter: according to the selected variant Number of teeth: see description of selected variant Min. collar diameter: see description of the selected variant Max. collar diameter: according to the selected variant Before ordering a loop, compare the parameters with your used handle or chuck. We do not guarantee compatibility with old Czech chucks and chucks of brands other than Vertex - each manufacturer uses different types of loops.
from 2,04 € with VAT -
Countersink for TPUN inserts , VERTEX
Countersink for inserts / countersinks for inserts Range: according to the chosen variant Number of beds: 3 Chamfer / countersink angle: 45 ° / 90 ° Clamping shank: see description of selected variant Overall length: see description of selected variant The holders are without exchangeable plates. The plates fit into the holder: see the description of the selected variant Application: Ideal for roughing and machining common steels and cast iron, using suitable inserts (TPKR with chip breaker) and stainless steel.
from 59,18 € with VAT -
Screw studs , HRC27
Screw double-sided thread - pin Size: according to the selected variant Total length: according to the selected variant Other dimensions - see the attached catalog sheet Strength screw, HRC 27° Suitable for machine use for clamps/bridges/nuts, not suitable for use in auto-moto
from 1,32 € with VAT -
Angle cutter with cylindrical shank, type SAE, Vertex
Side and corner cutter / holder for replaceable cutting inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates - triangular positive: according to the selected variant Other dimensions: see catalog sheet Angle: 90° The packaging is without VBD
from 40,62 € with VAT -
Boring head, type VBC, VERTEX
Boring head for boring knives Head size (diameter): according to the selected variant Clamping thread for mandrel : 1 1/2" - 18 threads per inch (see related products) The package includes a head + Allen key Knives for the head can be purchased additionally - see related products
from 96,81 € with VAT -
Precision machine vice with large opening, type VJ, VERTEX
Recommended ✓Brand precision machine vise with precision and large opening. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or see the attached catalog sheet The prismatic jaw can be purchased additionally - see related products Possible clamping with or without a wheel - both surfaces ground.
from 363,97 € with VAT -
Clamping angle plate reinforced, type VR, VERTEX
Rectangular angle plate for clamping, with reinforced arm Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded functional surfaces with flatness up to 0.01mm / 100mm.
from 81,83 € with VAT -
Clamping angle plate open, type VR, VERTEX
Rectangular angle plate for clamping Dimensions: according to the selected variant Other dimensions and parameters - see the attached catalog sheet Dimensions of grooves - on request The plate is used for precise clamping / angling of the object during machining, outlining, etc. Material: High-strength cast iron Grinded (all) surfaces with flatness up to 0.01mm / 100mm.
from 62,28 € with VAT -
Control drawing pad - pair, VERTEX
Pair of unused prism cubes with 1 notch from Vertex ( V-cube backing without yoke / prismatic cube ) Dimensions (dimensions according to the attached photo): L: according to the selected variant W : according to the selected variant H : according to the selected variant Other dimensions - see the attached table The accuracy of the flatness of the prismatic grooves for a pair: up to 0.05mm (with a max. distance of the cubes 300mm apart) The price is for a pair - i.e. for 2 cubes
from 20,96 € with VAT -
Driving carrier , type VDC
The driving heart is used for turning the workpiece when clamped between the tips For diameters: according to the selected variant Suitable for grinding or turning between points The drifting of the object is done via an eccentric lever. The front is engaged by a spring, the eccentric lever rests against a pin stop on the lathe flange - see attached catalog sheet.
from 20,73 € with VAT -
Diamond dresser with cylindrical shank, type VDR, VERTEX
Abrasive wheel dresser Diamond: according to the selected variant ( CT ) Clamping diameter: according to the selected variant Total length of the dresser: according to the selected variant Number of stones: 1 For discs with a maximum diameter: see product description for individual variants Usage: For restoring the surface / dressing of grinding wheels Recommended inclination to the disc: 10° to 15° The cutting speed (circumferential speed of the wheel) has a decisive influence on the lifetime of the diamond. The smaller the relative speed of the grinding wheel relative to the diamond (15-20m/s), the smaller the dressing diamond can be.
from 14,06 € with VAT