VERTEX

Copy cutter / holder for replaceable cutting inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: RDMT 10T3 Other dimensions: see catalog sheet The packaging is without VBD

Rotating machine vice with full bed and groove for draining liquid Width of the jaws: according to the selected variant Revolving range: 360° Other dimensions - see attached catalog sheet or product description for individual variants Possible clamping with or without a wheel - both surfaces ground.

Face cutter / holder for replaceable cutting inserts - VBD Diameter: according to the selected variant Number of blades: according to the selected variant Type of plates: according to the selected variant Other dimensions: see catalog sheet Angle: 80° The packaging is without VBD Usage : The milling cutter has a cutting edge through the middle, it is also possible to drill with it.

Tilting 2-axis tilting rotary machine vise with precision base Width of the jaws: according to the selected variant Other dimensions - see attached catalog sheet or product description for individual variants Scale on both axes - see attached photo

Branded machine vice with wheel drive and hydraulic pressure. Width of the jaws: according to the selected variant Other dimensions - see attached photos or product description for individual variants. The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Milling tilting table with T-slots / with T-slot Size: according to the selected variant Scale: 45°-0°-15° Other dimensions - see the attached catalog sheet Usage : Under a milling machine, drill or sharpener Locksmith precision

Machine vise with hydraulic pressure Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The wedge mechanism of the jaws pushes the clamped workpiece down - the jaws do not "lift"!!! Accuracy up to 0.01mm The screw is encapsulated -> protection against dust, chips and dirt. Body made of high quality and durable ductile cast iron. The vise bed is hardened to 45 HRC Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Guide stones and clamping screws are not part of the package.

Rotating tiltable machine vice with tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description of the individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Rotating tilting machine vice with lateral tilting and hydraulic converter. Width of the jaws: according to the selected variant Other dimensions and parameters - see the product description for individual variants or the attached catalog sheet Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68)

Milling tilting table with T-slots / with T-slot and turning table Size: according to the selected variant Scale: 45°-0°-15° Other dimensions - see the attached catalog sheet Usage : Under a milling machine, drill or sharpener Locksmith precision

Branded CNC machine vise with hydraulic pressure. Width of the jaws: according to the selected variant Additional dimensions and parameters - see the attached catalog sheet or product description for individual variants The opening can be adjusted using a pin to 4 positions - see the attached catalog sheet The clamping stop (clamping force) can be adjusted - there is a ring with a scale on the handle, which can be pushed against the vise by loosening two Allen screws and thus always achieve a constant tightening force for all workpieces. We recommend purchasing a pressure gauge with the vise, thanks to which you can always adjust the clamping force as needed. The screw is encapsulated -> protection against dust, chips and dirt. The vise bed is open. The body is made of high-quality and highly resistant ductile cast iron FCD60 Use hydraulic oil #68 (PARAMO HM 68 or other hydraulic oil with a viscosity of 68) Clamps (4 pcs), guide stones (2 pcs), handle are also part of the delivery.

Tilting table with T-nut grooves Hob size: according to the selected variant Other dimensions - see the attached catalog sheet Tilt: 0-90°