StimZet
-
Cobalt drill for metal HSSCo8 PN2906, 338RNHSSCo8, StimZet
Right-handed ground spiral cobalt drill for steel with cylindrical shank Drill length: Medium series - lengths see attached photo Edge angle: 128 °, special cut according to DIN 1412, shape C (for machining stainless steels and special materials) Helix angle: 25-30 ° Material: HSSE - High speed steel + Co8 Standard: DIN338 (replaces PN 2906 / PN2906) Usage: General - hand, stand, column drills Titanium alloys Austenic steels resistant to corrosion, acids and heat High-strength and low-tensile steels with tensile strength up to 1200MPa Hardox 450 and Hardox 500 Alloy steel, cast steel with strength over 1000 N / mm2 Stainless steel Steel for volume hot and cold forming, rolls of rolling mills, steel for cementing and tempering Drills have increased heat resistance with a special groove profile. * Possibility of delivery with TiN or TiAlN coating.
from 2,13 € with VAT -
NC drill for metal 90 ° HSSCo5 ČSN 221185, StimZet
Right-handed ground short spiral NC drill for steel with cylindrical shank Edge angle: 90 ° Helix angle: 25-30 ° Material: HSSCo5 (High speed steel HSSE, ie HSS + 5% Co) Standard: ČSN 221185 Usage: Special drill for position-accurate and fast drilling on NC / CNC machines, jig boring machines, etc. The drill is used on NC machines for drilling holes in materials such as steel, stainless steel, composites, inconel, brass, titanium, aluminum alloys, plastics or wood. It can also be used for chamfering and deburring.
from 5,26 € with VAT -
Short drill for metal HSS PN 2905, StimZet
Short drill with cylindrical shank, material HSS Standard: PN 2905 / DIN1897RNHSS Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling Powerful drills recommended for common drilling on automatic and turret lathes in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steel, short-chip aluminum alloys, bronze, tough brass . Especially suitable for drilling thin-walled materials.
from 1,06 € with VAT -
Short cobalt drill for metal HSS CO5 PN 2905 T1000, StimZet
Short drill with cylindrical shank, material HSS Co5 Standard: PN 2905 T1000 / DIN 1897 GT100 Form C - ground conical surface with shortening of the transverse edge - type C PROFI - tools produced by grinding and precision milling High-performance drills with increased heat resistance with a special groove profile recommended for drilling in alloy steel parts, steel castings with strength above 1000 N / mm2, especially steels for volume hot and cold forming, rolls of rolling mills, steels for cementing and tempering, stainless steel.
from 1,79 € with VAT -
Metal drill bit HSS 12 ° PN 2911 for non-ferrous metals, StimZet
Right-handed ground twist drill with slow helix, for hard brittle materials with brittle chips Drill length: Classic short series - lengths see enclosed catalog sheet Edge angle: 118 ° Helix angle: 10 ° - 15 ° Material: HSS - High speed steel Standard: PN2911, DIN338 RH Usage: General - hand, stand, column drills Non-ferrous metals - aluminum, copper, bronze, brass, plastics, resins and horn, eternit, slate, mica, hard rubber, etc. materials with friable chips
from 1,55 € with VAT -
Extra long HSS metal drill, DIN 1869, ZV 3001, StimZet
Extra long right-hand twist drill for steel with cylindrical shank Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSS Standard: DIN1869, ZV 3001 Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
Price - On request -
Extra long metal drill HSSCo5, ZV 3001 T1000, StimZet
Extra long right-hand twist drill for steel with cylindrical shank Edge angle: 118 ° Helix angle: 25 ° to 30 ° Material: HSSCo5 - High speed steel + 5% Co5 Standard: DIN1869, ZV 3001, T1000, GT100 Usage: General - hand, stand, column drills Alloy and non-alloy steel, cast steel with strength up to 900 N / mm2 Gray, malleable / ductile cast iron, sintered steel, short-chip aluminum alloy, bronze, tough brass.
from 6,64 € with VAT -
Milled drill bit for metal with taper shank ČSN 221140, StimZet
Drill with conical shank, morse taper Length of drills - see attached table Clamping shank: morse taper Helix: 25 to 30 ° Top angle: 118 ° Drilling depth: 5xD Material: HSS Drill production technology: milled / blackened Standard: ČSN 22 1140 / DIN345 RN Usage: Powerful drills recommended for drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steels, aluminum alloys with short chips, bronze.
from 10,73 € with VAT -
Wrought drill bit for metal with taper shank ČSN 221140, StimZet
Drill with conical shank, morse taper Length of drills - see attached table Clamping shank: morse taper Helix: 25 to 30 ° Top angle: 118 ° Drilling depth: 5xD Material: HSS Drill production technology: wrought / blackened Standard: ČSN 22 1140 / DIN345 RN Usage: Drills recommended for common drilling in components made of non-alloy and alloy steel, steel castings up to 900 N / mm2, gray, malleable and ductile cast iron, sintered steels, aluminum alloys with short chips, bronze, tough brass, etc.
from 11,81 € with VAT
