Marking and labeling

Electrochemical Marking Controller EC 200 with the possibility to control the marking intensity (12 - 24 V). Its advantage is the ability to control the performance of the device according to the depth and sharpness of the etched signs. It's a very popular type. This type of marking of metal parts does not burden the impact surface. Allows you to highlight all types of logos, graphics, numbers, pictures, codes and other high quality information. Labeling is done through a chemical reaction that causes surface breakage of the metal. The reaction is induced by the simultaneous action of the electrolyte solution and the el. current. Required characters are highlighted through special types of transparencies. Supplied in original plastic case. The set contains: 1 piece marking el.chem. heads - (without the possibility of attachment) 1 piece of electrochemical marking control unit: this includes the control elements of the instrument including a three-position switch for marking of black surfaces and aluminum, marking the depth and universal. It also contains a power regulator in the range of 12 - 24V. 1 piece 250 ml universal electrolyte 1 piece 250 ml neutralizing solution 20 pcs special marking foil 1 pc antipolar grounding plate 1 pcs rigid plastic case 1 pc instruction manual (Instruction) - Price increase of 5% of the total price. Cleaning of welds Switching to the depth marker position can clean and neutralize welds of stainless steel. Benefits of use: easy to use use anywhere in a confined space cleans and neutralizes immediately

It is a type of EC 300 which is designed for electrochemical marking with timing. Its advantage is that there is no need to control the length of time that the marking head is attached to the designated surface. This necessity is avoided by using an adjustable timer (2 - 20 sec.). After the corresponding time has elapsed, the control unit turns itself off.

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

This marker will give you a description of any material (iron, wood, concrete, plastic, etc.)

Set of 3pcs of a chuck made of chrom-vanadium. Diameters: 0.8, 1.5 and 2.5mm Rubberized Handle Hobby

Permanent water-resistant alcohol-based marker, opaque, quick-drying, acid-free, xylene-free Usable especially for metal, plastics, wood and glass Type FMP-50 tip width 5mm Before the first use, it is necessary to shake the label and soak the felt tip to get enough ink.

Permanent water-resistant alcohol-based marker, opaque, quick-drying, acid-free, xylene-free Usable especially for metal, plastics, wood and glass Type FMP-50 tip width 5mm Before the first use, it is necessary to shake the label and soak the felt tip to get enough ink.