Machine lamps

LED light bulb suitable for operation Dust-proof and waterproof tilt / arm lamp with hinge Glass diameter 125 mm Bulb socket: E26 (= 26mm) Option Tilt Turning in the 310 ° range LED 13W Bulb, 430-560 Lumens, White Light Power: 220V 1.8m Cable LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, workshop Ref. No. 1025-132

Úsporná lampa s LED žárovkou, vhodná do provozuPrachuvzdorná a voděodolná lampa s naklápěním / rameno s kloubemPrůměr skla 125 mmPatice žárovky : E26 ( = 26mm)Možnost různého naklápění ve třech kloubechOtáčení v rozsahu 310°LED žárovka 13W , 430-560 lumenů , bílé světloNapájení : 220VKabel o délce 1,8 mLampa s LED žárovkou neprodukuje nadměrné teplo - narozdíl od halogenového typuVhodná pro CNC, gravírovací a vyvrtávací stroje, soustruh, do dílnyObj. č. : 1025-136

LED light bulb suitable for operation Dust-proof and waterproof tilt / arm lamp with hinge Glass diameter 125 mm Bulb socket: E26 (= 26mm) Option different tilt in three joints Turning in the 310 ° range LED bulb 13W, 430-560 lumens, white light Power supply: 220V Cable 1.8m < br> LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, workshop Ref. No. 1025-137

Energy-saving LED bulb for a machine lamp Power: 4W (LED bulbs are about thermal power, not luminosity!) Socket: GU5.3 (pin spacing is 5.3mm) Diameter: 50mm Lifespan: 7 years (8 hours / day) Dimmable: no Angle of light: 30 ° Color temperature (color temperature - white light spectrum): 6500K (see attached picture) Power supply: AC 12V (DC 12V) Certification: CE, RoHS Suitable for lamps: VLED-20L, VLED-30M, VLED-30L

Energy saving LED bulb for machine lamp Power: 13W( LED bulbs are about heat output, not luminosity!) Socket: E26( = 26mm) Diameter: 95mm Dimmable: no Light angle: 30 ° C Color temperature(Color temperature - white light spectrum ): 5700K - 6500K(see attached image) Power supply: AC 100 - 240 V Certification: CE, RoHS Suitable for lamps: VLED-400L, VLED-400M, VLED-500S, VLED-500L, VLED-500M

Úsporná lampa s LED žárovkou s kloubem , vhodná do provozuPrachuvzdorná lampa s ohebným 300° kloubemPodstavec je bez magnetu, možno dokoupit - viz související produktyTyp LED čipu : Philips LED MR16 Patice žárovky : GU5.3 (rozteč kolíků je 5,3mm)Rameno - délka : 500mmLED žárovka 6W (12V) , 285 lumenů , bílé světloNapájení : 230VKabel o délce : 1,8 mLampa s LED žárovkou neprodukuje nadměrné teplo - narozdíl od halogenového typuVhodná pro CNC, gravírovací a vyvrtávací stroje, soustruh, do dílnyObj. č. : 1025-150

Energy saving lamp with LED bulb with joint, suitable for operation Dustproof lamp with flexible 300 ° joint The base is without a magnet, can be purchased - see related products LED chip type: Philips LED MR16 Bulb socket: GU5.3 (pin spacing is 5.3mm) Arm - length: 500mm LED bulb 6W (24V), 285 lumens, white light Power supply: 230V Cable length: 1.8 m A lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, workshop Ord. No.:1025-150-24V

Lamp with halogen lamp and flexible arm, suitable for operation Halogen bulb included Power supply: 24V (without plug and socket plug, cable ends with refined wires => directly connected to 24V terminal blocks!) Protection: IP20 Flexible arm Cable length 1.8m Suitable for wiring directly to the machine - to 24V terminals Lamp without magnet, attaches with four screws over the corners of the stand. Ref. No .: 1025-151 24V

Economic LED machine lamp with IP protection, suitable for NC / CNC operation with high-pressure cooling Dimensions: 340x50x27mm Protection: IP69 K, waterproof, dustproof, up to 10MPa pressure, IEC III Color temperature: 5000K Ra75 LED type: 42x mini power LED Power: 13W Power supply: 24V DC, cable and transformer need to be purchased separately - see related products Current: 0, 54A Operating temperature: -20°C to 80°C Material: anodized aluminum, frosted safety glass with a thickness of 4 mm Fixing: L-profiles with the possibility of turning the light The lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, for the workshop

Economical LED machine lamp with IP protection, suitable for NC / CNC operation with high-pressure cooling Dimensions: 629x50x27mm Protection: IP69 K, waterproof, dustproof, up to 10MPa pressure, IEC III Color temperature: 5000K Ra75 LED type: 84x mini power LED Power: 26W Power supply: 24V DC, cable and transformer need to be purchased separately - see related products Current: 1, 08A Operating temperature: -20°C to 80°C Material: anodized aluminum, 4mm thick frosted safety glass Fixing: L-profiles with the option of turning the light fixture The lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, for the workshop

Economic LED machine lamp with IP protection, suitable for NC / CNC operation with high-pressure cooling Dimensions: 340x70x27mm Protection: IP69 K, waterproof, dustproof, up to 10MPa pressure, IEC III Color temperature: 5000K Ra75 LED type: 84x mini power LED Power: 26W Power supply: 24V DC, cable and transformer need to be purchased separately - see related products Current: 1, 08A Operating temperature: -20°C to 80°C Material: anodized aluminum, frosted safety glass with a thickness of 4 mm Fixing: L-profiles with the possibility of turning the light The lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, for the workshop

Economic LED machine lamp with IP protection, suitable for NC / CNC operation with high-pressure cooling Dimensions: 629x70x27mm Protection: IP69 K, waterproof, dustproof, up to 10MPa pressure, IEC III Color temperature: 5000K Ra75 LED type: 168x mini power LED Power: 52W Power supply: 24V DC, cable and transformer need to be purchased separately - see related products Current: 2, 16A Operating temperature: -20°C to 80°C Material: anodized aluminum, 4mm thick frosted safety glass Fixing: L-profiles with the option of turning the light fixture The lamp with an LED bulb does not produce excessive heat - unlike the halogen type Suitable for CNC, engraving and boring machines, lathe, for the workshop