LUKO STROJÍRNY S.R.O.

Metal end cap for LUKO lubricating presses Including seal Thread M10x1 The end cap is shown in a circle on the attached photo

Cylindrical metal end piece for LUKO grease guns Including seal Thread M10x1 Diameter x length: dia. 12 x 15mm Material: galvanized steel The end cap is shown in a circle on the attached photo

M03101 Universal Pressure Lubricator, including Tip Plug Volume: 150cm3 Dimensions : Press body diameter: 40mm Overall length of the press: 220 / 350mm This press is designed for oil and grease lubrication. It is filled from the rear after unscrewing the lid so that the oil is poured into the tank and the grease of the regular consistency can be sucked. Other fats are filled with spatula.

M03110 Universal Pressure Lubricator with Tip with Tip Volume: 80cm3 Dimensions : Press body diameter: 40mm Overall length of the press: 150 / 220mm This press is designed for oil and grease lubrication. It is filled from the rear after unscrewing the lid so that the oil is poured into the tank and the grease of the regular consistency can be sucked. Other fats are filled with spatula.

M03112 Universal Pressure Lubricator, including Tip Plug Volume: 250cm3 Dimensions : Press body diameter: 50mm Overall length of the press: 225 / 370mm This press is designed for oil and grease lubrication. It is filled from the rear after unscrewing the lid so that the oil is poured into the tank and the grease of the regular consistency can be sucked. Other fats are filled with spatula.

Metal pressure grease press universal M03113, including tip with tip Volume: 125cm3 1x metal ball contact 1x metal pointed contact - see photo Dimensions: Diameter of the body of the press: 40mm Total length of the press: 182mm This press is designed for oil and grease lubrication. It is filled from the back after unscrewing the cap so that the oil is poured into the tank and grease of a normal consistency can be sucked up. Other fats are filled with a spatula.

Plastic pressure grease universal M03116, including tip with tip Volume: 250cm3 1x metal ball contact 1x metal Tip touch - see photo Dimensions: Diameter of press body: 50mm Total length of press: 225 / 370mm < br> This press is designed for lubrication with oil and grease. It is filled from the back after unscrewing the lid so that the oil is poured into the tank and the fat of normal consistency can be sucked in. The other fats are filled with spatulas.

Oil pressure grease press M03150 Volume: 150cm3 1x coupling M01845, M01847 Dimensions: Diameter of press body: 50mm Total length press: 240mm Galvanized surface

Classic lubrication press with steel container with filling and venting valve and decompression screw Can be used for loose grease and cartridges. There is an air valve on the body of the head to facilitate the build-up of pressure after filling Working pressure: 20MPa Dosage quantity: 0.95 cm3 Thread for lubrication hoses: M10x1,0 Container diameter: 57mm Total length: 370mm

Piston pump - for suction and filling of oil Drawbar pump, pumping Content: 500ml / 500cm3 * Packaging is without hoses Do not use on: petrol, thinner and brake fluid

Grease sprayer metal, galvanized, suitable for suction and filling oil, without hose / attachment, it must be purchased separately Content: 500ml / 500cm3 Thread: G 1/8 "(M10x1) Dimensions: diameter 57mm x length 335mm Standard: ÄOSN 231430 Used to extract old used oils from various machines and equipment. , Thinner and brake fluid

Oil dipstick type 6HR - oil level indicator Oil dipstick including seals. Hexagon size: 30mm