KMITEX s.r.o

Caliper micrometer Scope: according to the selected variant Division: 0.01mm Standard: DIN 863 / ČSN 251420

Cycle micrometer digital Scope: according to the selected variant Subtraction 0.001mm Further information - see product description for individual variants Accuracy according to DIN 863 Data output to PC Degree of protection IP54 (against splashing water and partly against dust) Battery power supply 1.5V LR44

Cycle micrometer digital Range: 0 - 25 mm Division: 0.001mm Further information - see product description for individual variants Accuracy according to DIN 863 Data output to a PC (a PC connection set can also be purchased - order no.: 6040.92) IP65 degree of protection (against splashing water and fully against dust) Battery power supply 1.5V LR44

Cycle micrometer digital PROFESSIONAL with rapid advance, with data output, ABS Scope: according to the selected variant Division: 0.001mm Further information - see product description for individual variants Rapid feed: The caliper is fixed (does not rotate), the feed is carried out by a lever under the display - when the lever is released, the contacts automatically feed back towards the measured surface - by a spring mechanism inside the micrometer. IP67 degree of protection: Dustproof, protected against water jets in different directions Battery: CR2032 A USB cable for connecting to a PC can be purchased with the micrometer (see attached photos), order code: 6040.9

Double-sided sliding gauge, slider, slide. Measuring range: according to the selected variant Division: according to the selected variant Calibration : without calibration, unless otherwise stated Locking with a screw ČSN 251238 Basic series, accuracy up to 0.03mm, relatively smooth operation, unfortunately the design is more of a hobby slider.

Digital caliper, professional quality, with large display, depth gauge and bluetooth Scope: according to the selected variant Division: 0.01mm Accuracy: 0.02mm up to 130mm, 0.03mm over 130mm They also contain functions: ZERO, ABS, mm/inch switching, locking-screw. Each caliper of this model has a serial number Bluetooth connection : There is no need to purchase any additional data cable or software. Just pair the meter with the PC via Bluetooth, after pressing the button on the meter, the value will be transferred to the PC. For the correct function of the transfer, it is necessary to have the English keyboard switched on the PC.

Sliding gauge / slide gauge / analog slider monoblock, with fine displacement and depth gauge Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Upper tips: according to the selected variant Material: INOX / stainless steel

Digital internal cavity micrometer for measuring holes Scope: according to the selected variant Division: 0.001mm Further information - see product description for individual variants

Slide gauge, slider, slide mm with fine adjustment and upper tips Scope: according to the selected variant Length of the jaws: according to the selected variant Division: according to the selected variant Locking screws The slider enables internal measurement from 10mm Material: steel Each slider has a serial number

Digital caliper, professional quality with bluetooth, large display, with flat depth gauge Scope: according to the selected variant Division: 0.01mm IP protection: IP67 Accuracy: 0.02 to 130mm, 0.03mm above 130mm With depth gauge Upper and lower jaws They also contain functions: ZERO, , mm/inch switching, locking-screw. Each caliper of this model has a serial number Bluetooth connection : There is no need to purchase any additional data cable or software. Just pair the meter with the PC via Bluetooth, after pressing the button on the meter, the value will be transferred to the PC. For the correct function of the transfer, it is necessary to have the English keyboard switched on the PC.

Digital caliper, professional quality with flat depth gauge with set tolerance monitoring Scope: according to the selected variant Division: 0.01mm IP protection: IP67 Accuracy: 0.02 to 130mm, 0.03mm above 130mm With depth gauge Upper and lower jaws They also contain functions: ZERO, TOL, mm/inch switching, locking-screw. Description of the TOL function: On the slider, you set the lower and upper limit (tolerance) in which you want to measure. You then measure and the slide automatically evaluates whether the measurement is within tolerance. Each caliper of this model has a serial number

Dial analog gear micrometer / dial micrometer Scope: according to the selected variant Division: 0.01mm Other dimensions - see product description for individual variants