Karnasch - Germany

Powerful cutting oil for normal structural steels and non-ferrous metals, 2.5 liter packaging Prevents corrosion Does not contain any heavy metals Free of nitrate and chlorine Also suitable for applications with minimal lubrication. Dilutable with water: 5% oil = for common structural steels and non-ferrous metals 10% oil = for steels with higher strength and noble © steels With increasing demands on machinability, increase the dilution ratio - possibly only after use without dilution with water. * Always pour oil into water, never the other way around! Usage: cutting, milling, grinding, drilling and cutting threads

Powerful cutting oil in spray for machining all steels and non-ferrous metals. No compressed gas with a hand pump.

Foam spray for cutting threads, highly effective for various types of machining of steels and non-ferrous metals. Volume: 400ml It adheres very well to the instrument, it does not drip and do not spray. It is suitable for working in demanding conditions, for example. overhead and in situations where dripping / spraying is a problem. Also suitable for working with machines that are not equipped with a cooling system. Advantages: excellent adhesion, does not drip or spray around like a regular liquid Increases the durability of the tool Increases the quality machined surface Sulfur or oil free Usage: Excellent for cutting, milling, drilling and cutting threads common steels and non-ferrous metals. How to use: Direct use on a workpiece or tool.

Universal use. Suitable for steel, stainless steel, poorly machinable materials, non-ferrous metals such as aluminum, copper, brass. The wax holds well on the tool, does not drip or spray like ordinary cutting oils Ideal for working in difficult positions (above the head, etc.) Chlorine free Usage: cutting, drilling, threading and grinding of all common steels. Also suitable for machining hard-to-machine materials such as titanium, manganese steel, cast steel, chrome-nickel or molybdenum steel, non-ferrous steels such as aluminum, copper and brass.

Univerzální použití. Vhodná pro ocel, nerez , špatně obrobitelné material, neželezné kovy jako je hliník, měď, mosaz. Vosk dobře drží na nástroji , neodkapává ani se nerozprašuje jako běžné řezné oleje Ideální pro práci v obtížných polohách (nad hlavou apod.) Bez obsahu chloru Použití : řezání, vrtání, řezání závitů a broušení všech běžných ocelí. Vhodný také při obrábění špatně obrobitelných materiálů jako je titan, manganová ocel, litá ocel, chrom-niklová nebo molybdenová ocel, neželezné oceli jako hliník, měď a mosaz.

Designed for non-ferrous metals, such as aluminum, copper, brass. Wax holds well on tool Ideal for working in difficult positions (above the head, etc.) Chlorine free

Set of short three-edged milling cutters with cutting edge through the center( drilling) with weldon face 70.3004 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting edge accuracy : k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of edges: 3 b. Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions

Set of short three-edged roughing cutters with cutting edge through the center( drilling) with weldon face 70.3006 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Diameter accuracy tolerances cutting edges: k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of cutting edges: 3 cutting edges Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions Type HR: For roughing materials with medium to higher strength, machining Ra 6.3 and coarser.

Set of short four-edged cutters with cutting edge through the center( drilling) with weldon face 70.3008 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Tolerance of cutting edge accuracy : k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of edges: 4 b. Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions

Set of short four-edged roughing cutters with center cutting edge( drilling) with weldon face 70.3009 Set contents: 6x13, 8x19, 10x22, 12x26, 16x32, 20x38 mm Diameter accuracy tolerance cutting edges: k10 Clamping shanks: 6mm(d6), 10mm(d8 d10), 12mm(d12), 16mm(d16), 20mm(d20) Number of cutting edges: 4 cutting edges Material: HSSX-V2 HSS with vanadium admixture Coating: TiAlN-FUTURA - extremely abrasion resistant coating Standard: DIN 1835 B, DIN 844 N, ISO 1641, ČSN 222130( CSN 22 2130) Application: For machining in 3 axes For materials with strength up to 1400MPa - for more see PDF - Cutting conditions Type HR: For roughing materials with medium to higher strength, machining Ra 6.3 and coarser.