Karnasch - Germany

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 80 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 14-17mm: 20.1302 For diameters 18-60mm: 20.1427 For diameters 61-200mm: 20.1428 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1650 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 110 mm Welding shank - 19 mm (3/4 ") Centering pins (see related products): For diameters 14-17mm: 20.1304 For diameters 18-55mm: 20.1428 For diameters 56-200mm: 20.1486 Blade material: carbide Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1660 Usage: Drilling in steels with hardness

Jigsaw - core drill for magnetic drill with carbide brazed cutting edges Sandvik Crown diameter: according to the selected variant Recommended drilling depth - max 150 mm Welding shank - 19 mm (3/4 ") Blade material: carbide Centering pins (see related products): For diameters 18-19mm: 20.1429 + 20.1399 For diameters 20-54mm: 20.1152 For diameters 55-60mm: 20.1124 Thanks to the conical geometry of the spiral, chips are perfectly removed and the drills achieve the highest drilling performance even with difficult-to-machine materials. Catalog number: 20.1665 Usage: Drilling in steels with hardness

Clamp - holder for Karnasch core drills, screw type Morse taper: according to the selected variant For clamping shanks: according to the selected variant The drill is clamped in the head over screws. Without internal cooling

Clamp - holder for Karnasch core drills, screw type with internal cooling Morse cone: according to the selected variant For clamping shanks: according to the selected variant Length of the clamping device: according to the selected variant The drill is clamped in the head via screws. With internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) Without internal cooling

Quick-release chuck - holder for Karnasch core drills, quick-change design with internal cooling Morse taper: according to the selected variant Just click the drill into the chuck. For clamping shanks: 3/4 "(resp. 19.05mm) With internal cooling

3bř. conical countersink made of cobalt high-speed steel, finely ground with CBN disc Number of edges: 3 Blade angle: 90st. Maximum diameter: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: BLUE-TEC, increases the life of the countersink when cutting with very limited cooling (spray, paste), as well as when cutting dry Material: HSS-XE - high-alloy cobalt high-speed HSSE steel (68 HRC) Usage: Alloy steel with tensile strength up to 1100N / mm2 Stainless steel with tensile strength up to 900N / mm2 Gray cast iron Aluminum alloys with silicon content> 10% Copper, brass, plastics Features: Excellent chip evacuation, cutting edge, resulting surface without scratches, excellent tool-hole centering The countersink grooves are ground with a CBN wheel, which makes the cutting edge sharper and smoother compared to conventional countersinks where the grooves are milled.

Screw guide pin for Karnasch countersink - cat. no. 20.1786.045 Guide pin diameter: according to the selected variant The pin has an internal thread, it is screwed onto the countersink 20.1786.045 - see related products.

Guide pin for Karnasch countersink - cat. no. 20.1796.040 Guide pin diameter: according to the selected variant The screw for securing the guide pin is ordered separately - order no. 20.1455 The guide pin is rigid and precise. When drilling without a guide pin, make sure that you drill really precisely - in the axis of the drilled hole.

SK carbide / carbide technical cutter, double sec Type: KUD - spherical Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Diameter of the clamping shank: according to the selected variant Total length of the tool: according to the selected variant Coating: according to the selected variant Gearing HP-3 : Standard gearing - the most used / universal type Large removal thanks to the crosscut on the cutting edge ensuring smooth machining with the formation of a short chip. Suitable for materials: * cast steel up to 60 HRC * stainless steel (INOX) * alloys of nickel and titanium , also for copper, brass and bronze Usage : Suitable for chamfering, needling, deburring, surface repair after welding, surface shaping Cat. No. - series: 113031 and 115031

SK carbide / carbide technical cutter, double sec Type: RBF - round / tree-shaped / tree-shaped, with a radius Diameter of the cutter: according to the selected variant Blade length: according to the selected variant Diameter of the clamping shank: according to the selected variant Total length of the tool: according to the selected variant Coating: according to the selected variant Gearing HP-3 : Standard gearing - the most used / universal type Large removal thanks to the crosscut on the cutting edge ensuring smooth machining with the formation of a short chip. Suitable for materials: * cast steel up to 60 HRC * stainless steel (INOX) * alloys of nickel and titanium , also for copper, brass and bronze Usage : Suitable for chamfering, needling, deburring, surface repair after welding, surface shaping Cat. No. - series: 113051 and 115051