Hand tools
-
-
Keys, wounds and sets of keys
-
Bits and bit holders
-
Pliers, wrenches and sheet metal shears
-
Our TONA Expert
-
Screwdrivers
-
Brushes, files and rasps
-
Boxes and gills
-
Hammers, axes and saws
-
Punches, lengths, ejectors
-
Clamps
-
Magnets and magnetic collectors
-
The rest
-
Angle magnet, magnetic clamp 190x125x26mm - angles 45°, 90°, 135°, Corona
Practical angular magnet, welding clamp for easy holding of metals in welding, drilling, riveting, ..... Can be used for angle clamping: 45, 90, 135 ° Dimensions (maximum dimension): Height: 125mm Width: 190mm Thickness: 26mm
In stock9,67 € with VAT -
Angle magnet, magnetic clamp 95x65x13 angles 30°, 45°, 75°, 60°, 90°, Corona
Practical angular magnet, welding clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at angles 30, 45, 60, 75 and 90 ° < b> Dimensions (Max Dimension): Height: 65mm Width: 95mm Thickness: 13mm
On request3,48 € with VAT -
Angle magnet, magnetic clamp 120x90x15 angles 30°, 45°, 75°, 60°, 90°, Corona
Practical angular magnet, welding clamp for easy metal holding in welding, drilling, riveting, ..... Allows to hold material at angles 30, 45, 60, 75 and 90 ° < b> Dimensions (Max Dimension): Height: 90mm Width: 120mm Thickness: 15mm
In stock6,51 € with VAT -
Angle magnet, magnetic clamp 136x110x24 angles 30°, 45°, 75°, 60°, 90°, Corona
Practical angular magnet, welding clamp for easy metal holding on welding, drilling, riveting, ..... Allows to hold material at angles 30, 45, 60, 75 and 90 ° < b> Dimensions (Maximum Dimension): Height: 110mm Width: 136mm Thickness: 24mm
On request9,90 € with VAT -
Front riveting pliers 300mm, Richmann
Lever riveting pliers frontal 300mm For steel, copper, aluminum and stainless steel rivets Gear mechanism enables riveting with lower control force. The package contains exchangeable heads for rivets with diameters of 2.4 / 3.2 / 4.0 / 4.8 / 6.0 / 6.4 mm
On request16,09 € with VAT -
Gola reduction 1/2 - 1/4 inch, reducing, Richmann
Reduction from 1/2" to 1/4" hollow head Inner square 1/2", outer square 1/4" Material: Cr-V, i.e. Chrome-Vanadium The transition is from the classic 12.7mm square to 6.35mm. Attention - the reduction is only suitable for screwing, it is not suitable for tightening and loosening! Improper use, i.e. tightening or loosening via 1/2" lever / beam / ratchet can destroy the reduction - twist the 1/4" square.¨ Take therefore, use this reducer only as an "emergency helper" when you don't have a 1/4" ratchet at hand and only use it for resistance-free screwing.
In stock2,12 € with VAT