GISON

Pertinax drive blades(4pcs) for GP-921C Length: 38mm Height: 9,0mm Thickness: 2mm The slats are part of the drive mechanism of the pneumatic tool. The slats wear out normally over time, or if the drive mechanism is not sufficiently lubricated with air without impurities, their faster abrasion occurs. (using a dry tool without an eraser) and needs to be replaced. This is a consumable item.

Professional Pneumatic Gravity Marker / Marking Needle / with Tungsten Carbide Tip Punching: 34000 / min. Stroke: 1,2mm Air consumption: 0,07 m3 / min Maximum pressure: 6,2 bar Pen diameter: 17,5mm Overall length of the pen (metal part) : 160mm Inlet fitting: 1/4 " Hose: 1500 mm, hose diameter: 6,5mm Minimum diameter of inlet hose: 6,5mm Noise: 75dBA Vibration: We recommend to use dry and clean air without oil < CE serial number. Part of the drawing is a breakdown of individual parts. The package contains the Declaration of Conformity - according to Directive 2006/42 / EC and EN 792-9. Manufacturer GISON meets ISO-9001/2000 quality system certification Pneumatic tools are recommended to be lubricated with the professional lubricant Mobil Velocite 6 - see related products.

Replacement tip for pneumatic engraving pen The tip is ground to the tip in the range: 0.0mm to 0.1mm Wide range of options use, from glass to steel up to 63HRC The tip is made of high quality tungsten carbide. Disassembly is easy, the tip can be reground.

Replacement tip for pneumatic engraving pen The tip is ground to the tip in the range: 0.1mm to 0.2mm Wide possibilities use, from glass to steel up to 63HRC The tip is made of high quality tungsten carbide. Disassembly is easy, the tip can be reground.

Replacement tip for pneumatic engraving pen The tip is ground to the tip in the range: 0.2mm to 0.3mm Wide range of options use, from glass to steel up to 63HRC The tip is made of high quality tungsten carbide. Disassembly is easy, the tip can be reground.

Spare hose including ends for GION GP-940 engraving pen

Professional Air Blower with Rear Air Pipe Pumps: 3.700 / Files: 6mm Max. Pressure: 6.2 bar (90PSI) Air consumption: 0.28 m3 / min Inlet fitting: 1/4 " Minimum air hose diameter: 6.5mm Noise level: 90dBA < Vibration: 4.5 m / sec2 is a drawing with a breakdown of individual components 2000 Pneumatic tools are recommended to be lubricated with the professional lubricant Mobil Velocite 6 - see related products.

Pneumatic chisel attachment - GISON GP-150 / GP-190 / GP-250 remover and other pneumatic chisels needle diameter: 3mm Hexagon drive: 10mm Internal thread for chisel: not specified by the manufacturer(cca 29-30mm) Number needles: 19 Total length: 230mm Long life needles made of quality steel. Needles can be replaced. Clamping procedure: The attachment is screwed onto the body of the pneumatic chisel, the hexagon does not rotate, it moves only suddenly from front to back, there is a spring in the body of the attachment that returns the needles. If you want to use this attachment on your pneumatic chisel, make sure that it fits threaded and that the 10mm hexagon fits into the chuck hole of your chisel. * The external screws on the body of the attachment are only used to secure the inner threaded sleeve, they do not have to attach the attachment to the chisel influence. Usage: Suitable for tapping rust, old paint on frames, frame structures and bottlenecks near solid metal Furthermore, also for tapping slag during welding, paint, plaster and concrete, as well as for stone processing. Not suitable for tapping sheets!

Professional twin hammer pneumatic hammer tweezer - TwinHammer system - shock-free Tightening torque: up to 820Nm Drilling square: 1/2 " Air consumption: 0 , 99 m3 / min Maximum pressure: 6.2 bar Overall length: 190mm Inlet fitting: 1/4 " Min. diameter of air hose: 8mm Noise: 91dBA Vibration:

Professional pneumatic pistol wrench with double percussion - TwinHammer system - shocks do not go into the hands - very comfortable work, very strong loosening( tension. upper half-axles) Tightening torque: up to 1900Nm Four-edge drive: 3/4 " Air consumption: 1.07 m3 / min Maximum pressure: 6.2 bar Overall length: 215mm Inlet fitting: 3/8 " Min. air hose diameter: 10mm Noise: 97dBA Vibration:

The set contains: 1x Professional twin hammer pneumatic hammer blower - TwinHammer system - shock-free operation - very comfortable work 1x Professional air grinder / fortuna with rear air outlet and with continuous speed control, with abrasive body Pneumatic wrench: Tightening torque: up to 820Nm Drilling square: 1/2 " Air consumption: 0.99 m3 / min Maximum pressure: 6.2 bar Overall length: 190mm Inlet fitting: 1/4" Min. Hose diameter: 8mm Noise level: 91dBA Vibration: