FANAR
-
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR with central cooling, FANAR
Recommended ✓WGN forming tap with lubrication groove with short lead and internal cooling (1x drilling) Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 27,99 € with VAT -
Forming tap M - HSSE-PM TiCN ISO2 E 6HX SR with cooling, FANAR
Recommended ✓WGN forming tap with lubrication groove with short lead and internal (2x drilling) cooling Form: E (1.5-2 ramps) Fitting: ISO 2, 6HX Material: HSSE - PM (High speed steel + 5% cobalt Co5) Coating: TiCN Standard: DIN371, DIN376 Usage: 1.1: Mild steels and magnetic steels up to 400N / mm2 1.2: Cutting steel, structural and case-hardening steels up to 500N / mm2 1.3: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 2.2: Austenitic stainless steel up to 850N / mm2 4.2: Aluminum alloys with silicon admixture from 1% to 7% 4.5: Zinc-doped long chipped copper
from 40,86 € with VAT -
Machine tap BSF - HSSE with chip breaker, FANAR
Machine tap (high speed) with chip breaker, straight slot Thread type: BSF - British Standard Fine thread Thread lead: B, 4 courses - see attached photo Thread apex angle: 55 ° Material: HSSE (High speed steel + 5% Cobalt) Ground thread profile Usage: Structural and carbon steel, low-alloy steel, steel castings up to 800N / mm2 Brass with a long chip Free-cutting steel, structural and case-hardening steel Spherical and malleable cast iron Non-alloy and low-alloy copper alloys Aluminum alloys with Si content
from 18,86 € with VAT -
Machine tap UNC - HSSE TiN 2B with chip breaker 800X, FANAR
UNC machine tap with straight groove and chip breaker 800X Thread type: UNC - American inch thread (UNified Coarse thread) Matching: 2B Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium nitride Ground thread profile Standard: DIN 371, DIN376 Usage: Steel Food stainless steel Cast iron Non-ferrous metals
from 13,41 € with VAT -
Machine tap UNF - HSSE TiN 2B with chip breaker 800X, FANAR
UNF machine tap with straight groove and chip breaker 800X Thread type: UNF - American inch thread (UNified Fine thread) Matching: 2B Material: HSSE (High speed steel + 5% Cobalt) Coating: TiN - Titanium nitride Ground thread profile Standard: DIN 371, DIN374 Usage: Steel Food stainless steel Cast iron Non-ferrous metals
from 15,65 € with VAT -
Machine tap UNC - HSSE PM HL MasterTap 2BX with chip breaker, FANAR
Universal machine tap (quick-cutting) with chip breaker, straight slot, MasterTap series Fitting: 2BX, ground thread profile Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Grounded thread profile Standard: DIN 371 / DIN376 Thread start: B, 4 courses - see attached photo Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.
Price - On request -
Machine tap UNF - HSSE PM HL MasterTap 2BX with chip breaker, FANAR
Universal machine tap (quick-cutting) with chip breaker, straight slot, MasterTap series Fitting: 2BX, ground thread profile Material: HSSE-PM (High-speed steel +5% Cobalt, production by sintering) Coating : HL - Balinit HardLube with carbide component (TiAlN + WC / C) with hardness 2600 HV Grounded thread profile Standard: DIN 371 / DIN376 Thread start: B, 4 courses - see attached photo Usage: Universal - for steels, stainless steels, cast iron, non-ferrous metals and heat-resistant steels, can be used in emergencies and for piece cutting of threads in hardened steel. Suitable for machining centers, possibly also for older types of numerical and conventional machines with lower performance.
Price - On request -
Machine tap M - HSSE-PM 1400 TiAlSiN ISO2(6H) spiral, FANAR
Machine tap with spiral groove, type PMS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering) Coating: TiAlSiN Helix angle: 15° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 15,05 € with VAT -
Machine tap M - HSSE-PM TS 1400-HT TiAlSiN ISO2 spiral (15 °), FANAR
Machine tap with spiral groove, type PM TS Fitting: ISO2 (6H) Material: HSSE-PM (High speed steel + 5% Cobalt, sintering production) Coating: TiAlSiN Helix angle: 15 ° Ground thread profile Standard: DIN 371, DIN374, DIN376 Usage: 1.5: Hardened and hardened steels up to 38 HRC up to 1400N / mm2 1.6: Alloys of steel and hardened steel up to 44 HRC 3.1: Gray cast iron 3.3: Ball and malleable cast iron up to 700N / mm2 4.6: Brass (copper-zinc steels with short chips) 4.9: Copper alloys with short chips
from 13,84 € with VAT -
Machine tap UNF - HSSE 2B spiral (40°) , FANAR
Machine spiral tap (quick-cutting) UNF, R40 SE 800 Thread type: UNF - fine American unified inch thread (UNified thread Fine) Fitting: 2B, ground thread profile Standard: DIN 371 / DIN 374, ANSI B-1.1 Thread start: C, 2-3 courses - see attached photo Material: HSSE (High speed steel +5% Cobalt) Coating: without coating Top thread angle: 60° Helix angle: 40° Usage: Structural and carbon steel, low-alloy steel, cast steel up to 800N/mm2 Brass with a long chip Automatic steel, structural and cement steel Spherical and malleable cast iron Unalloyed and low-alloyed copper alloys Aluminum alloys with Si content < 5% Thermoplastics
from 14,18 € with VAT -
Machine tap UNC - HSSE TiN 2B spiral (40°) 800X , FANAR
Machine tap UNC spiral 800X Thread type: UNC (UNified thread Coarse) - American inch unified thread coarse Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
from 14,57 € with VAT -
Machine tap UNF - HSSE TiN 2B spiral (40°) 800X , FANAR
Machine tap UNF spiral 800X Type of thread: UNF (UNified thread Fine) - American inch unified thread fine Fitting: 2B Material: HSSE (High speed steel + 5%Cobalt) Coating: TiN - Titanium Nitride Grounded thread profile Standard: DIN 371, DIN376 Usage: Steel Food grade stainless steel Cast iron Non-ferrous metals
from 17,01 € with VAT