Česká výroba

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h6 Top angle: 90 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide cutter / sintered carbide cutter Number of edges: 4bř. Working part diameter: according to the selected variant, tolerance h6 Top angle: 120 ° Helix angle: 0 ° Forehead angle: 0 ° Standard: DIN 6535 HA Carbide: K30 F - ultra fine-grained carbide, high hardness and abrasion resistance, with increased tensile strength for top stability. Always cool with a suitable liquid - depending on the material. Coating: PVD (AlTiN) Usage: Low-alloy steels up to 600 MPa Alloy steels up to 1200 MPa High-alloy / Tool steels up to 1400 MPa Austenitic / Ferritic stainless steels up to 680 MPa Martensitic stainless steels up to 820 MPa Gray cast iron Ductile iron Heat-resistant steels alloyed with Fe, Ni and Co up to 3000 MPa Titanium alloys; alpha and beta up to 2100 MPa Cutting conditions - see attached photo

Carbide (TK) milling cutter for roughing, straight face, cutting edges through the center, with weldon face Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Helix: 45 ° Other dimensions - see enclosed catalog sheet Coating: TiCN Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius or a longer blade.

Carbide (TK) milling cutter for roughing, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: BIGAAN Standard: DIN6535 Application: steel up to 1600 MPa, stainless steel and heat-resistant steel (Hastelloy, Hardox, etc.) Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) cutter, straight face, cutting edge through the center Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Number of edges: 5br. Helix: variable, to reduce vibration Other dimensions - see enclosed catalog sheet Coating: triple Cr coating Standard: DIN6535 Application: stainless steel and classic steel up to 1600 MPa, Hastelloy, Hardox etc. Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the corner radius, longer blade, different clamping diameter.

Carbide (TK) milling cutter for hardened steel milling, type HRD Diameter of the working part: according to the selected variant Length of the working part: according to the selected variant Other dimensions - see enclosed catalog sheet Coating: special three-layer coating + tumbling Standard: DIN6535 Usage: Cutting conditions - see attached photo We can have the cutter adjusted to order - finish the weldon face / corner radius / longer blade / clamping diameter / internal cooling in the middle or in a helix.

Left threaded eyelet with jaws / threaded eyelet with jaws Dimension and pitch: according to the selected variant Other dimensions - see product description for individual variants Metric thread left Material: NO - Tool Steel Standard: ČSN EN 22 568 / CSN EN 22568 ( ĆSN 22 3210 / CSN 223210 )

Holder for round radeco knives - turning knives with cylindrical shank Clamping diameter (radeco): according to the selected variant Clamping dimensions of the holder: according to the selected variant The holder is double-sided, secured with Allen screws The screws are hidden after tightening. Other dimensions - see product description for individual variants