Česká výroba
-
Carbide corner cutter for aluminum 3fl. 45 °, CERANIT
Carbide (TK) corner milling cutter for milling aluminum, aluminum alloys, non-ferrous metals, nickel, plastics, stainless steel Number of edges: 3bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 45 ° Carbide: K20 F - ultra fine-grained carbide Coating: uncoated / polished groove Usage: Universal milling, the cutter has a cutting edge through the center Suitable for machining aluminum, aluminum alloys, nickel, non-ferrous metals, plastics and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo
from 11,66 € with VAT -
Carbide roughing cutter 4fl. 43 ° TiAlN, CERANIT
Carbide (TK) milling cutter for roughing Number of edges: 4bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 43 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: Rough milling, roughing cuts on the cutter leave no traces, the cutter has 2 cutting edges through the center, reinforced core Suitable for machining tough steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo
from 20,85 € with VAT -
Carbide cutter for composite materials 6fl. 25 ° TiAlN, CERANIT
Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 6br. (2 points at the head) Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards The version with a drilling edge as in the photo has only a cutter dia. 3.15mm - 20.315 TiAlN. Other diameters are not drilled - the milling hole must first be pre-drilled.
from 8,31 € with VAT -
Carbide cutter for composite materials 5fl. 25 ° TiAlN, CERANIT
Carbide (TK) milling cutter for milling composite materials / micro drill for printed circuit boards Number of edges: 5br. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 25 ° DIN 6535 HA Carbide: K20 / 30 fine-grained carbide Coating: uncoated Usage: Suitable for machining - engraving: printed circuit boards, fiberglass, polyamide, Teflon, acrylates, gold, silver, brass, copper, plastics, graphite and mineral fiber boards
from 8,31 € with VAT -
Felt body with stem - cylindrical
Felt polishing body Diameter: according to the selected variant Length: according to the selected variant Clamping diameter: 6mm Material: technical rigid felt, density 0.56g/cm3 Felt bodies together with polishing paste are suitable for achieving a high shine on metals, gold, silver, non-ferrous metals, brass, aluminum
from 1,89 € with VAT -
Carbide toric cutter 2fl. 30 ° TiAlN, CERANIT
Carbide (TK) grooving toric cutter for grooving with corner radius Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for finishing operations Structural steels up to 500 N / mm2 Suitable for machining cast iron, non-ferrous metals, light and heavy metals, plastics, aluminum alloys, non-ferrous metals and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo
from 33,48 € with VAT -
Carbide toric reduced milling cutter 2fl. 30 ° TiAlN, CERANIT
Carbide (TK) torus cutter with corner radius Number of edges: 2bř. Diameter of the working part: according to the selected variant, tolerance h10 Helix: 30 ° Carbide: K20 F - ultra fine-grained carbide Coating: PVD (TiAlN) Usage: The cutter is suitable for a wide range of materials, for finishing operations Structural steels up to 500 N / mm2 Suitable for machining cast iron, non-ferrous metals, light and heavy metals, plastics, aluminum alloys, non-ferrous metals and stainless steels Also suitable for thermal and hydro clamping Cutting conditions - see attached photo
from 46,71 € with VAT -
Felt body with stem - cylindrical with radius
Felt polishing body Diameter: according to the selected variant Length: according to the selected variant Clamping diameter: 6mm Material: technical rigid felt, density 0.56g/cm3 Felt bodies together with polishing paste are suitable for achieving a high shine on metals, gold, silver, non-ferrous metals, brass, aluminum
from 1,22 € with VAT