CASTROL

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Suitable for Machining - Concentration, Milling, Grinding, Drilling, Thread Cutting Package quantity: 0.5 liter (plastic container with cap) No additives available release formaldehyde and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 8.5l to 12.5l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) *

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting Contains formaldehyde-free additives , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 16.7l to 25l mix) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) **

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Home Suitable for machining - soutružení, milling, grinding, drilling, tapping Units: 5 liters (plastic container with cap) does not contain ingredients that release formaldehyde , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. Dilution ratio is 6-10% (diluted to 83.5l to 100l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling

Castrol Alusol SL 51 XBB is a water-soluble semi-synthetic metalworking fluid. Weight / volume ratio: 1kg = 1LTR Specially designed for machining of aluminum alloys (**) or low, medium (**) alloy stainless steel (*), non-ferrous metals (*) and cast iron (*). Milling, Grinding, Drilling, Thread Cutting - , and is therefore in compliance with health and safety regulations. Does not contain boron, which means it complies with environmental protection requirements. No level of nitrite and chlorine, which means it meets the requirements of local legislation on waste treatment and environmental protection requirements. Resistant to fungi and bacteria, which extends the life of the liquid and reduces maintenance costs. Resistant against fungal attack, undermines fluid life and reduces downtime and maintenance. Minimum foaming at recommended water hardness. Excellent wetting and cleaning properties enable working fluid to be stored. Good corrosion properties provide a high level of corrosion protection from machines, tools and products. Covering a wide range of machining, which helps reduce costs. Suitable for both soft and hard water 100-1500 ppm CaCO3 Can be diluted by pouring into water while stirring. The dilution ratio is 6-10% (diluted to 167l to 200l of mixture) depending on the type of operation and material. Application: Aluminum Alloy ** Low Alloy and Medium Alloy Steel ** High Alloy Stainless Steel * Non-ferrous Metals * Cast Iron Grinding (6-7% concentration) * Milling, turning (6-8% concentration) ** Drilling (7-9% concentration) ** Reaming (8-10% concentration

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 0,5litr = 0,5kg Recommended concentrations: Gray iron grinding: 3-4 % (3% = 33.3l of mixture, 4% = 24l of mixture) Bore: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Cutting: 4-5% (4% = 24l of mixture, 5% = 19l of mixture) Milling: 5% (5% = 19l of mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mix) against biological attack by both bacteria and fungi, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 1 l = 1 kg - plastic container with cap Recommended concentration: Home grinding cast iron: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19 l mixture) Home Turning: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Home Cutting: 4-5% (4% = 24 l mixture 5% = 19 l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 5litres = 5kg Recommended grinding: Gray iron grinding: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19l mixture) Cutting: 4-5% (4% = 24l mixture, 5% = 19l mixture) Cutting: 4-5% Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Hysol T15 Liquid Concentrate - Castrol Hysol T15 is a multipurpose machining liquid free of phenols and nitrites. 10litres = 10kg Recommended grinding: Gray iron grinding: 3-4% (3% (4% = 24l of mixture, 5% = 19l of mixture) Boring: 4-5% (4% = 24l of mixture, 4% 5% = 19l mixture) Cutting: 4-5% (4% = 24l mixture, 5% = 19l mixture) Milling: 5% (5% = 19l mixture) Threading: 5-6% (5% = 19l mixture, 6% = 15.6l mixture) Highly resistant to biological attack as bacteria and mushrooms, so its maintenance is very easy. Usage: It is suitable for use in general machining operations on steel and cast iron, especially for grinding. Characteristics: It deals with many problems associated with the operation and performance of conventional refrigeration and lubricating liquids with the following benefits. Home - reducing production costs Home - exceptionally long life liquid Home - Home excellent anti-corrosion properties - can be used for different machining operations of steel and iron Home - very high quality of the worked surface Home - safe in Home use - easy maintenance Specifications: Home Appearance concentrate: Home yellowish liquid Relative density at 20 ° C: 995 kg / m3 of mineral Home Oil: 28% Emulsion Appearance: Clear White Liquid pH 3% Emulsion: 9.0 Refractometer Factor: 1.6 Minilabor Coefficient: 0.9 Corrosion protection according to DIN 51360/2, mark 0/0 at end. : 3%

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 0,5 liter Pack quantity (in kg): 0,445kg (main unit of measurement) - plastic container with cap It is formulated with Castrol technology, which gives the oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 1 liter Packaging quantity (in kg): 0,89 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 5 liters Packaging quantity (in kg): 4,45 kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C

Castrol Variocut B 30 Liquid High Performance Stretch Cutting Oil is a mineral chlorine-free cutting oil. Packaging quantity (in liters): 10 liters Packaging quantity (in kg): 8,9kg (main unit of measurement) - plastic container with closure < It is formulated from Castrol's additive technology, which gives oil extra lubricating properties even under extreme working pressures. Application: Highly alloyed steel materials Designed for machining under very difficult conditions, for stretching, hobbing, gearing, threading etc. Helps create excellent quality of the final surface even behind the vu extreme machining conditions and, in addition, will help to extend tool life. Characteristics: - Does not contain chlorine - Reduced costs of oil disposal - Castrol additive technology - Increase tool life, Increase machining speed, Excellent finish finish, - Good wetting characteristics - Low oil yield, lower costs - High air separation - Reduced foaming and oil aeration - Low odor - Contribute to improving the working environment Technical parameters : Appearance at 25 ° C: Yellowish, Clear Relative Density at 20 ° C: 0.882 Kinematic Viscosity at 40 ° C: 22mm2 / s Flash point according to Pensky-Martense : 169 ° C