Aircraft - Německo

T-distributor for air with external threads External thread: according to the selected variant Material: brass

Elbow to the air distribution External thread: according to the selected variant Material: brass

Block for air distribution External thread: according to the selected variant Material: brass The inner hem has a conical taper towards the head. It is sealed only with tape in the thread.

Air blow gun with venturi nozzle / injector Air consumption: 150 l/min Working pressure: 6 bar Suitable for professional use Venturi nozzle provides 100% more air The gun has a quick-coupling tip

Cartridge Explosion-Proof Dimensions (W × H × D): 360 × 160 × 60 mm Weight: 0.46 kg

Tire inflation pressure gauge with pressure gauge, calibrated pressure gauge Test gauge has been performed, filler has a seal. A 63mm diameter alarm clock is fitted with a rubber casing Clearly arranged Bar and PSI Max. Measuring up to 10 Bar and 140 PSI Max. Pressure: 12 Bar Rubber hose with a total length of 350 mm is fitted with a straight end with a securing segment Release is done by pushing a button on the pistol body The filler is fitted with a pin for connection to a standard quick coupling in the pressure manifold

Special hardened nozzle with automatic material suction Container volume 1 liter Working pressure: 4-8bar Air consumption: 250-300l / min To remove rust and residue in hard-to-reach places . Hard Steel Nozzle 6mm Recommended grain size of abrasive is 0.8mm

Thick nozzle, material pick-up from a separate container Working pressure 4-8bar Air consumption: 250-400l / min To remove rust and residue in hard-to-reach places. The abrasive material is sucked from an external hose tank over 2m long. Hardened steel nozzle 6mm. The recommended grain size of the abrasive is 0.8mm

For grinding material up to 0.8 mm Length of suction hose 1700 mm, d = 18/24 mm Hardened steel nozzle 6.0 mm Working pressure: 5-8bar Air consumption : 320-420l / min To remove rust and residue in a hard-to-reach area. The abrasive material is sucked in by a large 1.7 m long rubber suction hose. The recommended grain size of the abrasive is 0.8mm

Air blow gun with long nozzle Nozzle diameter: 4mm Air consumption: 80-300 l/min The gun has a quick release end Max. operating pressure: 6 bar Working pressure: 2-6 bar

Air blow gun with long nozzle Nozzle diameter: 4mm Nozzle length: 135mm Air consumption: 150 l/min The gun has a quick release end Max. operating pressure: 6 bar Working pressure: 6 bar

Blow guns, universal guns for cleaning large areas Unlimited use in production and workshop, for car and at home For quick cleaning in large areas and accessible places