Indirect dividing device for rotary and tilting table 100mm and 150mm, DP-1
| HV-4 - HV-6 / DP-1 |
In stock
(2x)
|
85,97 € with VAT |
| HV-8 / DP-2 |
In stock
(1x)
|
94,92 € with VAT |
| HV-10 - HV-16 / DP-3 |
In stock
(3x)
|
126,11 € with VAT |
| CS-6 + CS-8 / DP-4 |
In stock
(4x)
|
144,58 € with VAT |
| VU-300 / DP-5 |
On request
|
92,92 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000010572
- Brand:
- VERTEX
- Warranty:
- 24 months
- Code:
- 1001-030
Product information
Max. diameter: 100mm
Clamping hole: 22mm
For rotating tables and dividers with diameters 100 to 150 mm
- with knife ruler and locking pin
Suitable for turntables HV-4, HV-6 and RT 100, RT 150
Ref. No. 1001-030
Variants
Accessories
-
Rotary table 110mm tilting under the milling machine - round, VU-100
Rotary dividing table tilting 110 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 117mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with nonius control wheel - fine division - is 68mm, rotation axis 80mm 1001-011
In stock531,11 € with VAT -
Rotary table 150mm tilting under the milling machine - round, VU-150
Rotary dividing table tilting 150 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 140mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with a nonius - casting Tilt and is 75mm, rotation axis is 90mm Base size 180x210 1001-012
In stock607,94 € with VAT -
Rotary table 150mm under the round milling machine, HV-6
Horizontal and vertical clamps 16 "or nuts can be purchased - see" Related goods " Guide stones 2pcs: 16mm - not included! Stones need to be adjusted - the groove in the table is lower than the height of the stones according to the ČSN standard. b> Axis heights: Vertical clamping: 102mm Table height: Horizontal clamping: 78mm > Vertical clamping: 205mm Maximum permissible table load: Horizontal clamping: 40kg Vertical clamping: 20kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position ..................... seating area is ground, equipped for storing centering stones. Order No.: 1001-001
In stock293,85 € with VAT -
Rotary table 110mm under the round milling machine, HV-4
High-quality rotary dividing table - 110 mm circular cutter < 16 "or T11 / M10 or T11 / M8 nuts can be purchased - see" Related goods " Clamping: Horizontal - 2 stones 12mm Clamping: Vertical - 2 milled areas for clamps - Packaging) Axial heights: Vertical clamping: 80mm Table height: Horizontal clamping: 58mm Vertical clamping: 138mm Maximum allowable table load: Horizontal clamping: 35kg Vertical clamping: 18kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position . In the middle of the plate is the centering hole MK2. The bottom bearing surface is ground, equipped for storing center stones. Order No.: 1001-000
In stock278,20 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!