Height adjustable tailstock 130-200mm, TS-3

Home Quality rotary dividing table - divider under the router 250 mm circular Home Horizontal and vertical clamping Home Around the perimeter of the turntable 360 ??is a scale Home grooves: 6x T14 Home Axis height: Home Vertical mounting: 163 mm table height: Home Horizontal mounting: 106 mm Vertical Home clamping: 321 mm Home The maximum permissible load of the table: Home Horizontal mounting: 90 kg Home Vertical mounting: 50kg Vernier: 1 revolution Home = 4 ° rotation 1 dots = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position. In the center of the plate is the centering hole MK3. The bottom bearing surface is ground, equipped for storing center stones. Ref. No. 1001-003

High-quality rotary dividing table - 300 mm circular cutter Horizontal and vertical clamping 360 ° scale round the circumference of the turntable 6x T16 > Axis Height: Vertical Clamping: 194mm Table Height: Horizontal Clamping: 123mm Vertical Clamping: 388mm > Maximum permissible table load: Horizontal clamping: 120kg Vertical clamping: 60kg Nonius: 1 turn = 4 ° rotation 1 dots = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position. In the center of the plate is the centering hole MK4. The bottom bearing surface is ground, equipped for storing center stones. Shipping dimensions: (W x D x H) 45x58x26cm Art. No. 1001-004

Rotary dividing table tilting under a 200mm circular cutter. Horizontal mounting with the possibility of inclination 0-90 Â °. The height of the table at 0 Â ° is 177mm. Scale: 360 ° The lower seating surface is ground, equipped for storing center stones. Precise positioning(turning) with the control wheel with vernier - fine division. It is possible to buy additional cutting discs with a ruler. Turntable and vernier can be locked in the selected position. It is clamped to the worktop with attached clamps(4pcs). Ord. A „. : 1001-013

Professional massive cast iron rotary round cutting table - divider with a cutter under a cutter of 200/3 Possibility of cutting seamlessly over a cord and vernier, after its disconnection(lever) it is also possible to divide with automatic locking by 15A ‚ °(24 positions) Chuck diameter: 200mm(type VSK-8A) Through hole in the glass / table: 63mm / impassable The chuck is rotated 360  ° positive: 310x285mm / 225x160mm Overall height: 243mm / 285 mm Other dimensions - see attached PDF data sheet No accessories to storage additional leaders. The package also includes discs for division into 2, 3, 4, 6, 8 and 12 positions(resp. 180  °, 120  °, 90  °, 60  °, 45  °, 30  °) Quick setup, easy operation. Vernier: 1 turn = 4 rotation ° rotation 1 length = 1(one minute of degree) Maximum Full resolution: 20A‚´ A‚´(20 seconds) Turntable and vernier can be locked in the selected position. The lower seating surface is ground, equipped for storing middle stones. Ord. A „. : 1001-061

Massive cutting device with universal glass with locking at 15 Â °(24 positions), suitable for large and long workpieces Diameter of glass sensors: 200mm(type VSK-8A) Through hole in the glass / table: 58mm / 63 mm The chuck is rotatable through 360 Â ° Dimensions bases: 318x374mm / 230x155mm Overall height: 209mm / 274 mm Other dimensions - see attached PDF data sheet these additional jaws. The package also includes discs for division into 2, 3, 4, 6, 8 and 12 positions(resp. 180 Â °, 120 Â °, 90 Â °, 60 Â °, 45 Â °, 30 Â °) Quick setup, easy operation. Contact the Company: Cat. A „. : 1001-063