FLT-104 flange for rotary table HV-4, HV-6, VU-100, VU-150 and VUT-6

High-quality rotary dividing table - 110 mm circular cutter < 16 "or T11 / M10 or T11 / M8 nuts can be purchased - see" Related goods " Clamping: Horizontal - 2 stones 12mm Clamping: Vertical - 2 milled areas for clamps - Packaging) Axial heights: Vertical clamping: 80mm Table height: Horizontal clamping: 58mm Vertical clamping: 138mm Maximum allowable table load: Horizontal clamping: 35kg Vertical clamping: 18kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position . In the middle of the plate is the centering hole MK2. The bottom bearing surface is ground, equipped for storing center stones. Order No.: 1001-000

Horizontal and vertical clamps 16 "or nuts can be purchased - see" Related goods " Guide stones 2pcs: 16mm - not included! Stones need to be adjusted - the groove in the table is lower than the height of the stones according to the ČSN standard. b> Axis heights: Vertical clamping: 102mm Table height: Horizontal clamping: 78mm > Vertical clamping: 205mm Maximum permissible table load: Horizontal clamping: 40kg Vertical clamping: 20kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position ..................... seating area is ground, equipped for storing centering stones. Order No.: 1001-001

Rotary dividing table tilting 150 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 140mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with a nonius - casting Tilt and is 75mm, rotation axis is 90mm Base size 180x210 1001-012