FLT-0 flange for rotary table HV-6, HV-8, VU-150, VU-200 and VUT-6

Universal chuck IUG - TYPE 243809.0 125 / 3-2 M2 TOS Svitavy, TYPE 2438090123220 Diameter: 125mm Clamping: M2 Accuracy: "2" - normal turning accuracy Balanced spiral wheel reduces vibrations at higher speeds HEM ??95 mm F ± 0,2 108 mm G 3xM8 mm H 51,5 mm J 19 mm K 8 mm L 97,6 mm N 66 , 4 mm O 22 mm P 3 x 9 mm R 32 mm S 4 mm T 58 mm U 56 mm Also suitable for rotary tables HV-6, HV-8 and larger.

Universal chuck IUG - TYPE 243809.0 125 / 3-1 M2 TOS Svitavy, TYPE 2438090123120 Diameter: 125mm Clamping: M2 Accuracy: "1" - superior < CSN 24 3809 / DIN 6350 / DIN 6350 CSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350 - Chuck housing: Ductile cast iron clamping screws and loop Cutting surface function, clamping precision and extending chuck life - > Balanced spiral wheel reduces vibrations at higher speeds HEM ??95 mm F ± 0,2 108 mm G 3xM8 mm H 51,5 mm J 19 mm K 8 mm L 97,6 mm N 66 , 4 mm O 22 mm P 3 x 9 mm R 32 mm S 4 mm T 58 mm U 56 mm Also suitable for rotary tables HV-6, HV-8 and larger.

Rotary dividing table tilting 150 mm circular. Horizontal fastening with a gradient of 0-90 °. Height at 0 ° is 140mm. Scale: 360 ° Grooves: 3x T-groove: 7/16 ", nuts can be purchased - see" Related goods " Centering hole MK2. equipped for storing center stones Precise positioning (rotation) with a nonius - casting Tilt and is 75mm, rotation axis is 90mm Base size 180x210 1001-012

High quality rotary dividing table - 200 mm circular cutter circular Horizontal and vertical clamping 360 ° scale round the circumference of the turntable > Axis Height: Vertical Clamping: 135mm Table Height: Horizontal Clamping: 100mm Vertical Clamping: 265mm Maximum permissible table load: Horizontal clamping: 80kg Vertical clamping: 40kg Nonius: 1 turn = 4 ° rotation 1 dots = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position. In the center of the plate is the centering hole MK3. The bottom bearing surface is ground, equipped for storing center stones. Ref. No .: 1001-002

Horizontal and vertical clamps 16 "or nuts can be purchased - see" Related goods " Guide stones 2pcs: 16mm - not included! Stones need to be adjusted - the groove in the table is lower than the height of the stones according to the ČSN standard. b> Axis heights: Vertical clamping: 102mm Table height: Horizontal clamping: 78mm > Vertical clamping: 205mm Maximum permissible table load: Horizontal clamping: 40kg Vertical clamping: 20kg Nonius: b> 1 turn = 4 ° rotation 1 dashes = 1 '(one minute) Maximum resolution: 20'' (20 seconds) Turn and nonius can be locked in the selected position ..................... seating area is ground, equipped for storing centering stones. Order No.: 1001-001