Drilling insert HSSE-PM 132° for steel, stainless steel and cast iron, Karnasch
| 9,5 mm |
On request
|
31,48 € with VAT |
| 10,0 mm |
On request
|
31,48 € with VAT |
| 10,2 mm |
On request
|
31,48 € with VAT |
| 10,5 mm |
On request
|
31,48 € with VAT |
| 10,8 mm |
On request
|
31,48 € with VAT |
| 11,0 mm |
On request
|
31,48 € with VAT |
| 10,5 mm |
On request
|
31,48 € with VAT |
| 12,0 mm |
On request
|
31,48 € with VAT |
| 12,5 mm |
On request
|
31,48 € with VAT |
| 13,0 mm |
On request
|
35,85 € with VAT |
| 13,5 mm |
On request
|
35,85 € with VAT |
| 14,0 mm |
On request
|
35,85 € with VAT |
| 14,5 mm |
On request
|
35,85 € with VAT |
| 15,0 mm |
On request
|
35,85 € with VAT |
| 15,5 mm |
On request
|
35,85 € with VAT |
| 16,0 mm |
On request
|
35,85 € with VAT |
| 16,5 mm |
On request
|
35,85 € with VAT |
| 17,0 mm |
On request
|
35,85 € with VAT |
| 17,5 mm |
On request
|
35,85 € with VAT |
| 18,0 mm |
On request
|
45,60 € with VAT |
| 18,5 mm |
On request
|
45,60 € with VAT |
| 19,0 mm |
On request
|
44,41 € with VAT |
| 19,5 mm |
On request
|
45,60 € with VAT |
| 20,0 mm |
On request
|
47,13 € with VAT |
| 20,5 mm |
On request
|
45,60 € with VAT |
| 21,0 mm |
On request
|
47,13 € with VAT |
| 22,0 mm |
On request
|
45,60 € with VAT |
| 23,0 mm |
On request
|
45,60 € with VAT |
| 24,0 mm |
On request
|
45,60 € with VAT |
| 25,0 mm |
On request
|
53,40 € with VAT |
| 26,0 mm |
On request
|
53,40 € with VAT |
| 26,5 mm |
On request
|
52,36 € with VAT |
| 27,0 mm |
On request
|
52,70 € with VAT |
| 28,0 mm |
On request
|
53,40 € with VAT |
| 29,0 mm |
On request
|
51,03 € with VAT |
| 30,0 mm |
On request
|
53,40 € with VAT |
| 31,0 mm |
On request
|
53,40 € with VAT |
| 32,0 mm |
On request
|
53,40 € with VAT |
| 33,0 mm |
On request
|
53,40 € with VAT |
| 34,0 mm |
On request
|
53,40 € with VAT |
| 35,0 mm |
On request
|
53,40 € with VAT |
| 36,0 mm |
On request
|
73,16 € with VAT |
| 37,0 mm |
On request
|
73,16 € with VAT |
| 38,0 mm |
On request
|
73,16 € with VAT |
| 39,0 mm |
On request
|
73,16 € with VAT |
| 40,0 mm |
On request
|
70,18 € with VAT |
| 41,0 mm |
On request
|
73,16 € with VAT |
| 42,0 mm |
On request
|
73,16 € with VAT |
| 43,0 mm |
On request
|
73,16 € with VAT |
| 44,0 mm |
On request
|
73,16 € with VAT |
| 45,0 mm |
On request
|
73,16 € with VAT |
| 46,0 mm |
On request
|
73,16 € with VAT |
| 47,0 mm |
On request
|
73,56 € with VAT |
| 48,0 mm |
On request
|
104,74 € with VAT |
| 49,0 mm |
On request
|
104,74 € with VAT |
| 50,0 mm |
On request
|
104,74 € with VAT |
| 51,0 mm |
On request
|
104,74 € with VAT |
| 52,0 mm |
On request
|
104,74 € with VAT |
| 53,0 mm |
On request
|
104,74 € with VAT |
| 54,0 mm |
On request
|
104,74 € with VAT |
| 55,0 mm |
On request
|
104,74 € with VAT |
| 56,0 mm |
On request
|
104,74 € with VAT |
| 57,0 mm |
On request
|
104,74 € with VAT |
| 58,0 mm |
On request
|
104,74 € with VAT |
| 59,0 mm |
On request
|
104,74 € with VAT |
| 60,0 mm |
On request
|
104,74 € with VAT |
| 61,0 mm |
On request
|
104,74 € with VAT |
| 62,0 mm |
On request
|
104,74 € with VAT |
| 63,0 mm |
On request
|
104,74 € with VAT |
| 64,0 mm |
On request
|
104,74 € with VAT |
| 65,0 mm |
On request
|
104,74 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- Brand:
- Karnasch - Germany
- Warranty:
- 24 months
Product information
For drilling the diameter: according to the selected variant
Apex angle: 132°
Material: sintered powder steel 25 with coating
The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life.
Usage :
Steel with strength up to 1365 MPa
Stainless steel with strength above 900 MPa
Cast iron up to 400HBW strength
Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much.
Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage.
Cat. No. : 22 2010
Variants
Accessories
-
ISO296 taper shank drill with helical groove, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable coolant plates and rings are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221030
from 161,51 € with VAT -
Drill with cylindrical shank DIN1835B with helical groove, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Spiral groove - use of the drill in drills and on all machines where the drill rotates and the workpiece stands - drills, milling machines, NC, etc. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 22100
from 154,70 € with VAT -
ISO296 taper shank drill with straight slot, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: ISO296 type BEK Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No. 221040
from 150,50 € with VAT -
Drill with cylindrical shank DIN1835B with straight slot, Karnasch
VBD drill - drill for exchangeable inserts, with internal cooling Drilling range: according to the selected variant Drilling depth: according to the selected variant Other measures - see the enclosed catalog sheet Standard: DIN 1835-B Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines and lathes / NC. The package includes a holder, 2x clamping screw and 1x torx key. Interchangeable inserts are purchased separately - see "Related Products" Karnasch manufactures both carbide and sintered steel inserts. It is therefore used both for NC (with carbide insert) and for conventional machines without numerical control (with sintered steel insert). Of course, carbide inserts can also be used on conventional machines, you just need to keep in mind that any vibrations (loose spindle, low rigidity of the system / machine, etc.) can cause premature damage / breakage of the carbide insert. Sintered steel is tougher and can withstand worse handling. Kat. No .: 22.1020
from 141,84 € with VAT
Alternatives
-
Carbide drill insert 132 ° for stainless, hard and hardened steel, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For drilling the diameter: according to the selected variant Apex angle: 132° Material: carbide 20/30 with Steel-Tec coating Usage : Steel with strength up to 1400 MPa Stainless steel with strength above 900 MPa Gray cast iron Hardox, Hastelly, Inconel, Nimonic and similar materials Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4010
from 37,11 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!