Drill 18.0-21.0mm 27xD with cylindrical shank DIN1835B with straight slot, Karnasch
| 9,5-11,0 mm 3xD |
On request
|
143,03 € with VAT |
| 9,5-11,0 mm 20xD |
On request
|
250,91 € with VAT |
| 9,5-11,0 mm 26xD |
On request
|
313,79 € with VAT |
| 11,5-12,5 mm 2,5xD |
On request
|
143,03 € with VAT |
| 11,5-12,5 mm 18xD |
On request
|
250,91 € with VAT |
| 11,5-12,5 mm 23xD |
On request
|
313,79 € with VAT |
| 13,0-15,0 mm 2xD |
On request
|
156,50 € with VAT |
| 13,0-15,0 mm 20xD |
On request
|
313,43 € with VAT |
| 13,0-15,0 mm 26xD |
On request
|
391,60 € with VAT |
| 15,5-17,5 mm 2xD |
On request
|
156,50 € with VAT |
| 15,5-17,5 mm 17xD |
On request
|
313,43 € with VAT |
| 15,5-17,5 mm 22xD |
On request
|
391,60 € with VAT |
| 18,0-21,0 mm 3xD |
On request
|
174,92 € with VAT |
| 18,0-21,0 mm 21xD |
On request
|
431,14 € with VAT |
| 18,0-21,0 mm 27xD |
On request
|
557,93 € with VAT |
| 22,0-24,0 mm 3xD |
On request
|
174,92 € with VAT |
| 22,0-24,0 mm 19xD |
On request
|
431,14 € with VAT |
| 22,0-24,0 mm 27xD |
On request
|
557,93 € with VAT |
| 25,0-29,0 mm 3xD |
On request
|
212,40 € with VAT |
| 25,0-29,0 mm 18xD |
On request
|
504,65 € with VAT |
| 25,0-29,0 mm 24xD |
On request
|
703,94 € with VAT |
| 30,0-35,0 mm 2,5xD |
On request
|
212,40 € with VAT |
| 30,0-35,0 mm 15xD |
On request
|
504,65 € with VAT |
| 30,0-35,0 mm 20xD |
On request
|
703,94 € with VAT |
| 36,0-41,0 mm 3xD |
On request
|
286,20 € with VAT |
| 36,0-41,0 mm 8xD |
On request
|
519,63 € with VAT |
| 36,0-41,0 mm 14xD |
On request
|
760,13 € with VAT |
| 36,0-41,0 mm 19xD |
On request
|
1.018,54 € with VAT |
| 42,0-47,0 mm 2xD |
On request
|
286,20 € with VAT |
| 42,0-47,0 mm 7xD |
On request
|
541,69 € with VAT |
| 42,0-47,0 mm 12xD |
On request
|
760,13 € with VAT |
| 42,0-47,0 mm 17xD |
On request
|
1.018,54 € with VAT |
| 48,0-55,0 mm 2,5xD |
On request
|
304,76 € with VAT |
| 48,0-55,0 mm 8xD |
On request
|
613,32 € with VAT |
| 48,0-55,0 mm 11xD |
On request
|
930,97 € with VAT |
| 48,0-55,0 mm 16xD |
On request
|
1.246,60 € with VAT |
| 56,0-65,0 mm 2xD |
On request
|
304,76 € with VAT |
| 56,0-65,0 mm 6xD |
On request
|
613,32 € with VAT |
| 56,0-65,0 mm 10xD |
On request
|
930,97 € with VAT |
| 56,0-65,0 mm 14xD |
On request
|
1.246,60 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000405972
- Brand:
- Karnasch - Germany
- Warranty:
- 24 months
- Code:
- 22.1020.05690.0180
Product information
Drilling range: 18.0 to 21.0 mm(use possible up to up to 24,0mm)
Drilling depth: 569, 0mm
Clamping shank d1: 25mm with weldon flat
Other measures - see attached data sheet
Standard: DIN 1835-B
Straight slot - use of a drill on a lathe and on all machines where the workpiece rotates and the drill stands - lathes, NC. Straight groove geometry is also suitable for machining cast iron, aluminum, etc., regardless of whether the workpiece or drill is rotating - ie use in drills / milling machines. and on lathe / NC.
The package includes a holder, 2x clamping screw and 1x torx key.
Interchangeable inserts are purchased separately - see section "Related products"
Karnasch manufactures inserts from both carbide and stainless steel. It is therefore used both for NC(with carbide insert) and for conventional machines without numerical control(with stainless steel insert).
Of course, carbide inserts can also be used with classic machines, only it is necessary to remember that possible vibrations(free spindle, low rigidity of the system / machine, etc. .) may cause premature damage / breakage of the carbide insert. Baked steel is tougher and can withstand worse treatment. Contact the Company: Cat. A „. : 22 1020 05690 0180
Variants
Accessories
-
Carbide drill insert 132 ° for stainless, hard and hardened steel, Karnasch
Carbide replaceable insert for Karnasch drill - see related products For drilling the diameter: according to the selected variant Apex angle: 132° Material: carbide 20/30 with Steel-Tec coating Usage : Steel with strength up to 1400 MPa Stainless steel with strength above 900 MPa Gray cast iron Hardox, Hastelly, Inconel, Nimonic and similar materials Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. no.: 22 4010
from 37,43 € with VAT -
Drilling insert HSSE-PM 132° for steel, stainless steel and cast iron, Karnasch
Replaceable insert for Karnasch drills For drilling the diameter: according to the selected variant Apex angle: 132° Material: sintered powder steel 25 with coating The perfect economic replacement for classic HSS drills, now with excellent performance, improved chip evacuation geometry, higher strength and longer service life. Usage : Steel with strength up to 1365 MPa Stainless steel with strength above 900 MPa Cast iron up to 400HBW strength Inserts made of sintered steel are recommended for use in drills / milling machines and lathes without numerical control (without NC). Thanks to their higher toughness, they can withstand even worse handling (than carbide) and do not chip as much. Carbide inserts are ideal for machines with numerical control (NC), but it is also possible to use them on classic machines without NC - you just need to think about the fact that possible tremors / vibrations during machining (free spindle, low rigidity of the machine ) can cause its premature damage / breakage. Cat. No. : 22 2010
from 31,75 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!