Chip drill for metal 5.2 mm HSSE Co5 DIN338, ProfiLine Vision, PTG
Variant:
2,0mm |
In stock
(4x)
|
4,72 € with VAT |
2,1mm |
On request
|
4,72 € with VAT |
2,2mm |
On request
|
4,72 € with VAT |
2,3mm |
On request
|
4,72 € with VAT |
2,4mm |
On request
|
4,72 € with VAT |
2,5mm |
On request
|
4,72 € with VAT |
2,6mm |
In stock
(1x)
|
4,72 € with VAT |
2,7mm |
On request
|
4,72 € with VAT |
2,8mm |
On request
|
4,72 € with VAT |
2,9mm |
On request
|
4,72 € with VAT |
3,0mm |
In stock
(2x)
|
2,82 € with VAT |
3,1mm |
On request
|
3,17 € with VAT |
3,2mm |
On request
|
3,17 € with VAT |
3,3mm |
In stock
(9x)
|
3,17 € with VAT |
3,4mm |
On request
|
3,75 € with VAT |
3,5mm |
On request
|
3,75 € with VAT |
3,6mm |
On request
|
3,75 € with VAT |
3,7mm |
On request
|
3,75 € with VAT |
3,8mm |
On request
|
3,75 € with VAT |
3,9mm |
On request
|
3,75 € with VAT |
4,0mm |
In stock
(2x)
|
3,75 € with VAT |
4,1mm |
On request
|
3,99 € with VAT |
4,2mm |
In stock
(1x)
|
3,99 € with VAT |
4,3mm |
On request
|
4,28 € with VAT |
4,4mm |
On request
|
4,28 € with VAT |
4,5mm |
On request
|
4,28 € with VAT |
4,6mm |
On request
|
4,53 € with VAT |
4,7mm |
On request
|
4,94 € with VAT |
4,8mm |
On request
|
4,94 € with VAT |
4,9mm |
On request
|
4,94 € with VAT |
5,0mm |
In stock
(1x)
|
4,94 € with VAT |
5,1mm |
On request
|
5,58 € with VAT |
5,2mm |
On request
|
5,58 € with VAT |
5,3mm |
On request
|
5,58 € with VAT |
5,4mm |
On request
|
5,58 € with VAT |
5,5mm |
In stock
(5x)
|
5,58 € with VAT |
5,6mm |
On request
|
6,22 € with VAT |
5,7mm |
On request
|
6,22 € with VAT |
5,8mm |
On request
|
6,22 € with VAT |
5,9mm |
On request
|
6,22 € with VAT |
6,0mm |
In stock
(9x)
|
6,22 € with VAT |
6,5mm |
In stock
(5x)
|
7,10 € with VAT |
6,8mm |
In stock
(2x)
|
8,22 € with VAT |
7,0mm |
On request
|
8,22 € with VAT |
7,5mm |
On request
|
8,98 € with VAT |
8,0mm |
In stock
(1x)
|
10,09 € with VAT |
8,5mm |
In stock
(2x)
|
11,68 € with VAT |
9,0mm |
On request
|
13,14 € with VAT |
9,5mm |
On request
|
14,21 € with VAT |
10,0mm |
In stock
(2x)
|
15,96 € with VAT |
10,5mm |
On request
|
17,61 € with VAT |
11,0mm |
In stock
(1x)
|
19,83 € with VAT |
11,5mm |
On request
|
21,18 € with VAT |
12,0mm |
In stock
(1x)
|
24,05 € with VAT |
12,5mm |
On request
|
24,99 € with VAT |
13,0mm |
On request
|
26,63 € with VAT |
Current price:
5,58 €
with VAT
4,61 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000516319
- Brand:
- PTG
- Warranty:
- 24 months
- Code:
- 283050520
Product information
3-edged right-cut ground spiral cobalt drill bit for steel and
stainless steel with cylindrical shank
Diameter: 5.2mm
Drill length: Short series - see attached photo for lengths
Material : HSSE - High-speed steel Co5
Standard : DIN338 ( replaces PN 2907 / PN2907 )
Use :
Stand and column drills, NC and CNC machines, possibly and hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages:
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Diameter: 5.2mm
Drill length: Short series - see attached photo for lengths
Material : HSSE - High-speed steel Co5
Standard : DIN338 ( replaces PN 2907 / PN2907 )
Use :
Stand and column drills, NC and CNC machines, possibly and hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages:
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Variants
How do customers see us?
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Kvalitni zbozi
Rychle dodani
Poradenstvi
Dobre ceny
"Nakupovali jsme jiz nekolikrat, vzdy maximalni spokojenost s kvalitou, komunikaci obchodu a peclive zabalenym zbozim.
Jsme verni zakaznici, v obchode budeme nakupovat i nadale."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!