Chip drill for metal 3.1 mm HSSE Co5 DIN338, ProfiLine Vision, PTG
* New item *
Variant:
| 2,0mm |
In stock
(4x)
|
4,72 € with VAT |
| 2,1mm |
On request
|
4,72 € with VAT |
| 2,2mm |
On request
|
4,72 € with VAT |
| 2,3mm |
On request
|
4,72 € with VAT |
| 2,4mm |
On request
|
4,72 € with VAT |
| 2,5mm |
On request
|
4,72 € with VAT |
| 2,6mm |
In stock
(1x)
|
4,72 € with VAT |
| 2,7mm |
On request
|
4,72 € with VAT |
| 2,8mm |
On request
|
4,72 € with VAT |
| 2,9mm |
On request
|
4,72 € with VAT |
| 3,0mm |
In stock
(2x)
|
2,82 € with VAT |
| 3,1mm |
On request
|
3,17 € with VAT |
| 3,2mm |
On request
|
3,17 € with VAT |
| 3,3mm |
In stock
(9x)
|
3,17 € with VAT |
| 3,4mm |
On request
|
3,75 € with VAT |
| 3,5mm |
On request
|
3,75 € with VAT |
| 3,6mm |
On request
|
3,75 € with VAT |
| 3,7mm |
On request
|
3,75 € with VAT |
| 3,8mm |
On request
|
3,75 € with VAT |
| 3,9mm |
On request
|
3,75 € with VAT |
| 4,0mm |
In stock
(2x)
|
3,75 € with VAT |
| 4,1mm |
On request
|
3,99 € with VAT |
| 4,2mm |
In stock
(1x)
|
3,99 € with VAT |
| 4,3mm |
On request
|
4,28 € with VAT |
| 4,4mm |
On request
|
4,28 € with VAT |
| 4,5mm |
On request
|
4,28 € with VAT |
| 4,6mm |
On request
|
4,53 € with VAT |
| 4,7mm |
On request
|
4,94 € with VAT |
| 4,8mm |
On request
|
4,94 € with VAT |
| 4,9mm |
On request
|
4,94 € with VAT |
| 5,0mm |
In stock
(1x)
|
4,94 € with VAT |
| 5,1mm |
On request
|
5,58 € with VAT |
| 5,2mm |
On request
|
5,58 € with VAT |
| 5,3mm |
On request
|
5,58 € with VAT |
| 5,4mm |
On request
|
5,58 € with VAT |
| 5,5mm |
In stock
(5x)
|
5,58 € with VAT |
| 5,6mm |
On request
|
6,22 € with VAT |
| 5,7mm |
On request
|
6,22 € with VAT |
| 5,8mm |
On request
|
6,22 € with VAT |
| 5,9mm |
On request
|
6,22 € with VAT |
| 6,0mm |
In stock
(9x)
|
6,22 € with VAT |
| 6,5mm |
In stock
(5x)
|
7,10 € with VAT |
| 6,8mm |
In stock
(2x)
|
8,22 € with VAT |
| 7,0mm |
On request
|
8,22 € with VAT |
| 7,5mm |
On request
|
8,98 € with VAT |
| 8,0mm |
In stock
(1x)
|
10,09 € with VAT |
| 8,5mm |
In stock
(2x)
|
11,68 € with VAT |
| 9,0mm |
On request
|
13,14 € with VAT |
| 9,5mm |
On request
|
14,21 € with VAT |
| 10,0mm |
In stock
(2x)
|
15,96 € with VAT |
| 10,5mm |
On request
|
17,61 € with VAT |
| 11,0mm |
In stock
(1x)
|
19,83 € with VAT |
| 11,5mm |
On request
|
21,18 € with VAT |
| 12,0mm |
In stock
(1x)
|
24,05 € with VAT |
| 12,5mm |
On request
|
24,99 € with VAT |
| 13,0mm |
On request
|
26,63 € with VAT |
Current price:
3,17 €
with VAT
2,62 € without VAT
On request
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000516104
- Brand:
- PTG
- Warranty:
- 24 months
- Code:
- 283050310
Product information
3-edged right-cut ground spiral cobalt drill for steel and
stainless steel with cylindrical shank
Diameter: 3.1mm
Drill length: Short series - see attached photo for lengths
Material : HSSE - High-speed steel Co5
Standard : DIN338 ( replaces PN 2907 / PN2907 )
Use :
Stand and column drills, NC and CNC machines, possibly and hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages:
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Diameter: 3.1mm
Drill length: Short series - see attached photo for lengths
Material : HSSE - High-speed steel Co5
Standard : DIN338 ( replaces PN 2907 / PN2907 )
Use :
Stand and column drills, NC and CNC machines, possibly and hand drills.
Structural steel
Unalloyed and alloyed steel, cast steel with strength up to 850N/mm2
Stainless steel
Wrought aluminum alloys and other aluminum alloys
Advantages:
Higher geometry / hole ovality - depending on the machine used, accuracy up to IT9 can be achieved.
Thanks to three blades, the feed can be increased by up to 60%.
The special geometry of the tip of the drill prevents the drill from slipping. Thanks to this, there is no need to use a punch to center the holes.
The drill does not jam when re-drilling an existing hole.
The chip is removed without a problem, less wear on the drill bit / longer service life, thanks to the distribution of the engagement on 3 blades.
Variants
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Široký sortiment
Dobrá cena
Rychlá doprava
"DOPORUČUJI!"
Kvalitni zbozi
Rychle dodani
Poradenstvi
Dobre ceny
"Nakupovali jsme jiz nekolikrat, vzdy maximalni spokojenost s kvalitou, komunikaci obchodu a peclive zabalenym zbozim.
Jsme verni zakaznici, v obchode budeme nakupovat i nadale."
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!