Universal self-centering chuck TOS IUS 200 / 3-1 M1, ČSN 243801
| IUS 80/3-1 (type Superior) | In stock | 229,67 € with VAT |
| IUS 80/3-2 (type Standard) | In stock | 190,60 € with VAT |
| IUS 100/3-1 (type Superior) | In stock | 254,73 € with VAT |
| IUS 100/3-2 (type Standard) | In stock | 206,11 € with VAT |
| IUS 125/3-1 (type Superior) | In stock | 278,29 € with VAT |
| IUS 125/3-2 (type Standard) | In stock | 224,01 € with VAT |
| IUS 160/3-1 (type Superior) | In stock | 346,89 € with VAT |
| IUS 160/3-2 (type Standard) | In stock | 279,78 € with VAT |
| IUS 200/3-1 (type Superior) | In stock | 434,58 € with VAT |
| IUS 200/3-2 (type Standard) | In stock | 380,00 € with VAT |
| IUS 250/3-1 (type Superior) | On request | 616,83 € with VAT |
| IUS 250/3-2 (type Standard) | In stock | 554,19 € with VAT |
| IUS 315/3-1 (type Superior) | In stock | 1.066,63 € with VAT |
| IUS 315/3-2 (type Standard) | In stock | 896,61 € with VAT |
| IUS 400/3-1 (type Superior) | On request | 1.436,20 € with VAT |
| IUS 400/3-2 (type Standard) | In stock | 1.288,84 € with VAT |
Interested in this product?
Can't find any information? Or not sure about the choice? Ask Us
- EAN:
- 1000000125917
- Brand:
- TOS Svitavy
- Warranty:
- 24 months
- Code:
- IUS-200/3-1-M1
Product information
Three-piece chuck, supplied in original box with set of inner and outer jaws and loop.
Precision "1" - more accurate universal, upper class, suitable for grinder
ČSN 243801 / CSN 24 3801
Diameter: 200
Clamping range E5 - 88 mm < Clamping range F5 - 83 mm
Clamping range G56 - 140 mm
Clamping range H116 - 200 mm
Clamping range J46 - 125 mm
Clamping range K105 - 185 mm
Clamping range L5 - 88 mm
Clamping range N57 - 140 mm
Clamping range O117 - 200 mm
Clamping range P69 - 148 mm
Clamping range R127 - 207 mm
Clamping range S max.246 mm < br> Clamping range T max.254 mm
Clamping type M1
Accuracy class increased accuracy SUPERIOR
Number of jaws 3
E H7 162 mm
F ± 0,2 180 mm
G 3xM10 mm
H 74 mm
J 29 mm
K 11 mm
L 127,5 mm
N 87,5 mm
O 17,5 mm
P 3x11 mm
R 52 mm
S 5 mm
T 76 mm
U 76 mm
Variants
Accessories
-
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX
Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.
In stock41,31 € with VAT -
Hard outer jaw SCV 200/3 - 1 for self-centering universal chuck TOS
New unused set of outer jaws for universal 200mm 3-spoke, precision 1 - superior 2 - Lathe precision (standard) ČSN 243849/24 3849 These jaws are referred to as "classical" lathes. They are suitable for clamping the workpiece for the inner diameter, but according to the manufacturer's catalog are referred to as external! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock135,07 € with VAT -
Hard inner jaw SCN 200/3 - 1 for universal self-centering chuck TOS
New Unused Set of Inside Jaws for Universal 200mm 3-Spoke, For Accuracy 1 - Superior Marking: SCNB 200 / 3-1, 243850203100 Explanatory notes: 1 - Abrasive Precision (Superior) 2 - Lathe precision (standard) ČSN 243850/24 3850 These jaws are referred to as "opposite". They are suitable for workpiece clamping for outdoor diameter, but according to the manufacturer's catalog are called internal! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock135,07 € with VAT -
Basic jaw SM 200/3 ČSN 243855 TOS
Basic jaws / lower ridges for TOS universal chuck chuck Size: 200 mm Number of jaws in set: 3 pcs ČSN 24 3855 Cat. number: 243855.203000 These spare jaws fit ONLY in the TOS Svitavy chucks. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!
In stock105,02 € with VAT
Alternatives
-
Universal self-centering chuck KUS 200/3 M1, Kovonastroje
Dimensions & Parameters - See enclosed PDF Accuracy, runout - see enclosed PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock231,97 € with VAT -
Universal self-centering chuck KUS 200/3 M1 HardLine, Kovonastroje
HardLine Series has locally grooved guide grooves for pinion mounting Diameter: 200 mm > Clamping: M1 Other Dimensions and Parameters - See Attached PDF Accuracy, Angling - See Attached PDF Additional sets of internal and external facepieces can be purchased - see related products. Chuck has a lubricant on the front of the chuck, the lubricant is recommended to use KV 100 oil for machining without rinsing or grease Gleit µHP 520TS / MOGUL CALSUL 2 WR for machining with rinse. The chuck is supplied in a paper box with Czech instructions.
In stock278,69 € with VAT
Do you need advice?
Jakub Novák, Orders
How do customers see us?
Free shipping
There is possibility of free shipping. For more information click here.
Fast shipping
If on stock, you will recieve your order in 1 working day.
Store
Most of the goods are available at the shop.
Individual discounts
Are you a loyal customer or do you want to become one? Contact us!