Universal self-centering chuck TOS IUG 100 / 4-1 M2, ČSN 243809

Spiral wheel / screw up to 100mm chuck Standard: A^SN 243881 Only suitable for TOS chuck, for IUG types, IUH, IUGG, IUGH, IUGO, IUHO Cat. A „. : 243881.01000000

Pinion up to 100mm chuck Diameter: 22mm Length: 37mm Standard: A „A’SN 243882 Suitable only for TOS storage, only for IUG type; IUH Cat. A „. : 243882.0100000

Insulating Pin for Chain Sprocket TOS 100mm Diameter 4mm Length 34mm Thread M5 Cat. No .: 243863.0100000

TOS> . number: 243857.103100

Soft Jaws / Soft Jaws Set of Monoblock Soft Jaws MC Universal Chuck 100mm, Four-Jaws ČSN 243834 These replacement Jaws fit ONLY to chucks TOS Svitavy. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

2 - Lathe precision (standard) ČSN 243849/24 3849 These jaws are referred to as "classical" lathes. They are suitable for clamping the workpiece for the inner diameter, but according to the manufacturer's catalog are referred to as external! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

TOS universal chuck: 100/4 Denomination: 2438760104300 ČSN 243876 / CSN 24 3876 These spare jaws fit into the TOS chucks ONLY Svitavy. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

2 - Lathe precision (standard) ČSN 243850/24 3850 These jaws are referred to as "opposite". They are suitable for workpiece clamping for outdoor diameter, but according to the manufacturer's catalog are called internal! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.