Universal self-centering chuck TOS IUG 80 / 4-1 M2, ČSN 243809

Clearance sale

Variant:

Choose variant

IUG 80/4-1 (type Superior)	On request	339,42 € with VAT
IUG 80/4-2 (type Standard)	In stock (2x)	301,59 € with VAT
IUG 125/4-1 (type Superior)	In stock (2x)	404,73 € with VAT
IUG 125/4-2 (type Standard)	In stock (2x)	338,47 € with VAT
IUG 160/4-1 (type Superior)	In stock (1x)	467,56 € with VAT
IUG 160/4-2 (type Standard)	In stock (1x)	397,55 € with VAT
IUG 200/4-1 (type Superior)	In stock (1x)	595,38 € with VAT
IUG 200/4-2 (type Standard)	In stock (1x)	511,00 € with VAT
IUG 250/4-1 (type Superior)	In stock (1x)	834,79 € with VAT
IUG 250/4-2 (type Standard)	In stock (1x)	749,15 € with VAT
IUG 315/4-1 (type Superior)	On request	1.423,60 € with VAT
IUG 315/4-2 (type Standard)	In stock (1x)	1.271,09 € with VAT
IUG 400/4-1 (type Superior)	On request	1.984,92 € with VAT
IUG 400/4-2 (type Standard)	In stock (1x)	1.640,87 € with VAT

Current price:

339,42 € with VAT

280,51 € without VAT

On request

Interested in this product?

Can't find any information? Or not sure about the choice? Ask Us

EAN:: 1000000125368
Brand:: TOS Svitavy
Warranty:: 24 months
Code:: 2438090084120

Product information

243809.0
80 / 4-1 M2 TOS Svitavy, TYPE 2438090083110
Diameter: 80mm
Clamping: M1 (only on the back)
Accuracy: "1" - superior
Chuck IUG 80/4 is without through holes !!!

ČSN 243809 / CSN 24 3809 / DIN6350 / DIN 6350

Body Chucks: Ductile cast iron
Two sets of jaws (1x internal and 1 x outer) are supplied with the universal. clamping screws and loop
Cutting surface function, clamping precision and extending chuck life

- > Balanced spiral wheel reduces vibrations at higher speeds
H7 56 mm
F ± 0,2 67 mm
G 3xM6 mm
H 35,5 mm
J 13 mm
K 6 mm
O 16,5 mm
P - -
R 15 mm
S 3 mm
T 45 mm

Download

Katalogový list TOS - IUG

Variants

IUG 80/4-1 (type Superior)

Code: 2438090084120

On request

339,42 € with VAT

IUG 80/4-2 (type Standard)

Code: 2438090084220

In stock

301,59 € with VAT

IUG 125/4-1 (type Superior)

Code: 2438090124120

In stock

404,73 € with VAT

IUG 125/4-2 (type Standard)

Code: 2438090124220

In stock

338,47 € with VAT

IUG 160/4-1 (type Superior)

Code: 2438090164120

In stock

467,56 € with VAT

IUG 160/4-2 (type Standard)

Code: 2438090164220

In stock

397,55 € with VAT

IUG 200/4-1 (type Superior)

Code: 2438090204120

In stock

595,38 € with VAT

IUG 200/4-2 (type Standard)

Code: 2438090204220

In stock

511,00 € with VAT

IUG 250/4-1 (type Superior)

Code: 2438090254120

In stock

834,79 € with VAT

IUG 250/4-2 (type Standard)

Code: 2438090254220

In stock

749,15 € with VAT

IUG 315/4-1 (type Superior)

Code: 2438090314120

On request

1.423,60 € with VAT

IUG 315/4-2 (type Standard)

Code: 2438090314220

In stock

1.271,09 € with VAT

IUG 400/4-1 (type Superior)

Code: 2438090404120

On request

1.984,92 € with VAT

IUG 400/4-2 (type Standard)

Code: 2438090404220

In stock

1.640,87 € with VAT

Show all variants

Accessories

Hard outer jaw SCV 80/4 - 1 for self-centering universal chuck TOS

2 - Lathe precision (standard) ČSN 243849/24 3849 These jaws are referred to as "classical" lathes. They are suitable for clamping the workpiece for the inner diameter, but according to the manufacturer's catalog are referred to as external! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

In stock

100,01 € with VAT

Choose variant
Hard inner jaw SCN 80/4 - 1 for universal self-centering chuck TOS

2 - Lathe precision (standard) ČSN 243850/24 3850 These jaws are referred to as "opposite". They are suitable for workpiece clamping for outdoor diameter, but according to the manufacturer's catalog are called internal! These spare jaws fit into the TOS Svitavy chucks ONLY. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

On request

100,01 € with VAT

Choose variant
Monoblock jaw MC 80/4 ČSN 243834, TOS

Soft Jaw / Soft Jaws These replacement jaws fit ONLY to chucks TOS Svitavy. If you have a chuck other marks, 100% will not be! Check the dimensions before ordering - see enclosed catalog sheet!

In stock

59,69 € with VAT

Choose variant
Pinion locking pin for TOS 80mm chuck, ČSN 243863

Insulating pin for chisel pinion TOS 80mm Diameter 4mm Length 34mm Thread M5 Cat. No .: 243863.0080000

In stock

1,37 € with VAT

Choose variant
Pinion for 80mm universal chuck TOS IUG; IUH, ČSN 243882

Pinion up to 80mm chuck Diameter: 20mm Length: 30,5mm Standard: A „A’SN 243882 Suitable only for TOS combine , only for IUG type; IUH Cat. A „. : 243882.0080000

In stock

9,56 € with VAT

Choose variant
Soft extension NC 80/4, ČSN 243857, TOS

TOS> . number: 243857.103100

In stock

42,93 € with VAT

Choose variant
Spiral wheel for 80mm universal chuck TOS IUG, ČSN 243881

Spiral wheel / screw up to 80mm chuck Standard: A^SN 243881 Only suitable for TOS chuck, for IUG types, IUH, IUGG, IUGH, IUGO, IUHO Cat. A „. : 243881.00800000

On request

67,94 € with VAT

Choose variant
Plastic lubricant 450g for lubrication of chucks NBI 2 WHITE with PTFE, LUBEX

Special synthetic white assembly lubricating paste / grease / petroleum jelly - Lubex PAST NBI2 WHITE without abrasive powder metal content with PTFE / Teflon content for clean assembly work. Quantity: 450g (in can) Color: white/beige, shiny Base oil: synthetic Thickener: Calcium-sulfonate complex Working temperature: -30°C up to 150°C High adhesion to lubricated surfaces, very high resistance to being washed away by water or cooling liquid. Suitable for lubrication of turning, grinding and CNC universal chucks, screws, rolling and sliding bearings, where the speed is slow. Especially suitable for applications in humid environments. It is characterized by high application versatility and long-term high utility value. Ideal for use under very high static and dynamic loads, on machine tools, guide surfaces and rails. Lubrication of chucks with this lubricant increases the efficiency of the chuck, thanks to which most of the input torque is converted into (greater) clamping force - thus preventing loosening and possible falling out of the workpiece. Most chuck manufacturers recommend a weekly relubrication interval. Advantages of use: - Suitable as a paste during assembly work - Also suitable for non-ferrous metals - Prevents wear, contact and tribo corrosion - Excellent anti-friction and EP properties and high white solid lubricant content - Resistant to water, coolants and cutting fluids, alkalis and chemicals - Prevents material interface corrosion and wear corrosion in exposed cases -Thanks due to the included polymers, the paste has exceptional toughness and washout resistance.

In stock

39,95 € with VAT